Page 71 - Plastic Process Equipment, Inc

HL-8 VACUUM HOPPER LOADER

PROPORTIONAL VIRGIN-REGRIND MIX
1500 LBS. PER HOUR MICROPROCESSOR CONTROL! BLOW-OFF
WITH AUTO
0-100% PROPORTIONAL MIXING!
SPUN ALUMINUM VENTED
TOP CAP CLAMPED DOWN BETTER THAN THE COMPETITION!
TO HOLD MOTOR FIRMLY
IN PLACE. SUPPLIED WITH
EASY DISCONNECT - SPECIFICATIONS -
EXTENDABLE 15ft.
CONTROL CABLE. • CAPACITIES: 1500 lbs. per hour @ 10 ft.
14" DIA. DIAPHRAGM vertical and 10 ft. horizontal.
FILTER SIZED FOR
MAXIMUM AIR FLOW • CONTROLS: Fully adjustable proportional
YET EASY TO CLEAN
OR REPLACE. microprocessor based controls.
LOAD = 10 to 70 seconds
* LONG LASTING AUTOMATIC BLOW-OFF PROPORTIONAL 0-100%
STAINLESS FILTER
STANDARD
FEATURE KEEPS FILTER DUMP = automatic
CLEAN. DO NOT
23-1/8" EXCEED 40PSI • FUNCTION LIGHTS show unit operation
• SOLID STATE RELAY.
TWO (2)
1-1/2" O.D.
MATERIAL • MOTOR: 2 stage quiet bypass continuous duty
INTAKE TUBES.
120/60/1, 11 amp motor. UL Recognized,
CSA Certified.
30-1/8" MAGNETIC DISCHARGE • ON DEMAND CYCLE CONTROL:
HEIGHT SENSOR REQUIRES NO
OVERALL ADJUSTMENT shuts unit down when hopper is full.
SPUN ALUMINUM
HOPPER ALL WELDED. LONG LASTING 14" STAINLESS STEEL
* FILTER STANDARD, 325 mesh (43 micron,
.0017 dia.). Install heavy mesh up!
• WEIGHT: 55 lbs. Aluminum design.
15" DIA.
MOUNTING PLATE, REQUIRES A
13" DIA HOLE IN YOUR HOPPER 300 HOUR (MOTOR RUN TIME) • HOPPER CAPACITY: 26 lbs. Polypro.
COVER. REPLACE BRUSHES INDICATOR LIGHT
AND RESET BUTTON • Conveys virgin pellets or regrind. No powders.
5-1/2" DIA. DISCHARGE SPOUT.
CONTROL BOX INCLUDES:
REMOTE MOUNTED 1. Fully adjustable microprocessor control 10 to 70 seconds from
PIVOTAL DISCHARGE SEAL PLATE WITH COUNTER MICROPROCESSOR outside the control box.
WEIGHT. (SEALS TIGHT EVERY TIME) BASED CONTROL
FOR MAXIMUM 2. Solid state timer and relay.
10 FT. GROUNDED PERFORMANCE AND 3. Circuit breaker mounted on side control box for quick reset.
POWER CORD. RELIABILITY No fuse to replace.
(not shown) SUPPLIED WITH WON'T RESET AUTOMATICALLY TO PURPOSELY
15FT CABLE.
MODEL HL-8 NOTIFY YOU OF A PROBLEM.
$ 2,900. 00 To reduce dangerous static 4. ON-OFF Switch.
5. Function indicator lights.
electricity, connect the ground wire
COMPLETE
between your hopper loader and
the metal pickup probe in your 6. Automatic on demand cycle control.
7. 300 hour replace brushes timer and reset button.
material supply. PPE Loaders are
PPE HL-8 HOPPER LOADERS come complete supplied with vacuum hose that 8. ROHS Compliant.
with two 36" long x 1-1/2" O.D. inlet stainless steel includes a static ground wire.
material probe, two 15 ft. sections of 1-1/2" I.D.
Grounded vacuum hose (FDA approved), four
hose clamps, air regulator, 22ft of 1/4" air line PART NO. DESCRIPTION PRICE
and operating instructions. Vacuum Hopper Loader - 1,500 lb/hr with
HL-8 $2,900.00
Proportional Virgin-Regrind Mix & Blow-Off
(2) 15 ft. Grounded Vacuum
Hose & (4) Hose Clamps FR2 Nylon Filter 14" dia (45 micron) $22.25 ea.
Air Pressure
Regulator with FR2F Felt Filter 14" dia (50 micron) $19.00 ea.
gauge and 22 ft. FR2SS All STAINLESS Steel Filter (43 micron) $34.70 ea.
of 3/8" air hose. *
ZX2059 Filter Rubber Gasket $6.40 ea.
(2) 36" STAINLESS STEEL 2UV66 Motor Brushes (2 per set) $18.55 set
Probes (TALP36) 2M433 Vacuum Motor 120/60/1 $157.85 ea.
Supplied Standard.
15ft Extension Cable 7 Pin Type for remote
HL-RC1507 $180.00 ea.
Control Box mounting (easily field installed)
HL-5PCB Spare Circuit Board for Control Box $282.00 ea.
1-1/2" O.D. Inlet
Supplied TALP36 36" Stainless Suction Probe 1-1/2" O.D. $120.00 ea.
PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
71