Page 67 - Plastic Process Equipment, Inc

HL-3 VACUUM HOPPER LOADER

AUTOMATIC - DEPENDABLE - LABOR SAVING
900 LBS. PER HOUR SOLID STATE CONTROLS!
BUILT TO LAST!
BETTER THAN THE COMPETITION!
SPUN ALUMINUM VENTED
TOP CAP CLAMPED DOWN
TO HOLD MOTOR FIRMLY - SPECIFICATIONS -
IN PLACE.
• CAPACITIES: 900 lbs. per hour @ 10 ft.
vertical and 10 ft. horizontal.
8-1/2" DIA. DIAPHRAGM
FILTER SIZED FOR MAXIMUM • CONTROLS: Fully adjustable solid state
AIR FLOW YET EASY TO
CLEAN OR REPLACE. timer.
LOAD = 25 to 90 seconds
DUMP = automatic
* LONG LASTING • ELECTRICAL SPIKE FILTER.
STAINLESS FILTER
AVAILABLE • SOLID STATE RELAY.
20" • MOTOR: 2 stage quiet bypass continuous
1-1/4" O.D.
MATERIAL duty 120/60/1, 8 amp motor is 10dB quieter
INTAKE TUBE. than standard vacuum motor.
UL Recognized, CSA Certified.
24-1/2"
HEIGHT • ON DEMAND CYCLE CONTROL:
OVERALL shuts unit down when hopper is full.
• 8-1/2" DIA. NYLON DIAPHRAGM FILTER:
SPUN ALUMINUM
HOPPER ALL WELDED AREA = 50.2 sq. in. (45 micron, .0018 dia.)
AND PROTECTIVE
* FILTER optional, 325 mesh (43 micron,
ANODIZED. LONG LASTING STAINLESS STEEL
.0017 dia.). Install heavy mesh up!
• WEIGHT: 20 lbs. Aluminum design.
11-1/2" DIA. • HOPPER CAPACITY: 9.1 lbs. Polypro.
MOUNTING PLATE, 10 FT. GROUNDED
REQUIRES A 9" DIA HOLE IN POWER CORD. • Conveys virgin pellets or regrind. No powders.
YOUR HOPPER COVER. (not shown)
CONTROL BOX INCLUDES:
3" DIA. DISCHARGE SPOUT. 1. Fully adjustable solid state timer 25 to 90 seconds from
outside the control box.
PIVOTAL DISCHARGE SEAL PLATE WITH 2. Electrical filter solid state timer and relay.
COUNTER WEIGHT. (SEALS TIGHT EVERY TIME)
3. Circuit breaker mounted on side control box for quick reset.
No fuse to replace.
MODEL HL-3 To reduce dangerous static WON'T RESET AUTOMATICALLY TO PURPOSELY
NOTIFY YOU OF A PROBLEM.
$ 1,280. 00 electricity, connect the ground wire 4. ON-OFF Switch.
between your hopper loader and
the metal pickup probe in your
5. Function indicator lights.
COMPLETE
material supply. PPE Loaders are
supplied with vacuum hose that 6. Automatic on demand cycle control.
PPE HL-3 HOPPER LOADERS come complete includes a static ground wire. 7. ROHS Compliant.
with a 36" long x 1-1/4" O.D. inlet material
Stainless Steel probe, 15 ft. of 1-1/4" I.D. vacuum
hose with ground wire (FDA approved), hose PART NO. DESCRIPTION PRICE
clamps and operating instructions. HL-3 Vacuum Hopper Loader - 900 lb/hr $1,280.00
Vacuum Hopper Loader w/Remote Control
HL-3-RCB12 $1,395.00
15 ft. Grounded Vacuum Box and 12 ft. Line Cord (factory installed)
Hose & Hose Clamps
FR1 Nylon Filter 8-1/2" dia (45 micron) $13.50 ea.
FR1F Felt Filter 8-1/2" dia (50 micron) $15.60 ea.
* FR1SS All STAINLESS Steel Filter (43 micron) $16.05 ea.
36" STAINLESS STEEL
Probe (TALP382P) ZX2054 Filter Rubber Gasket $4.30 ea.
Supplied Standard. 1R236 Motor Brushes (2 per set) $8.70 set
1R236XL Motor Brushes (Long Lasting) $13.55 set
Probe End Guard
prevents liners from 2M266 Vacuum Motor 120/60/1 $127.60 ea.
blocking probe inlet.
1-1/4" O.D. Inlet HL-1PCB Spare Circuit Board for Control Box $79.45 ea.
Supplied
TALP382P 36" Stainless Suction Probe 1-1/4" O.D. $120.00 ea.
PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
67