Page 69 - Plastic Process Equipment, Inc

HL-5 VACUUM HOPPER LOADER

PROPORTIONAL VIRGIN-REGRIND MIX
900 LBS. PER HOUR MICROPROCESSOR CONTROL! BLOW-OFF
WITH AUTO
0-100% PROPORTIONAL MIXING!
SPUN ALUMINUM VENTED
TOP CAP CLAMPED DOWN BETTER THAN THE COMPETITION!
TO HOLD MOTOR FIRMLY
IN PLACE. EASY DISCONNECT - SPECIFICATIONS -
CONTROL CABLE.
EXTENDABLE FOR • CAPACITIES: 900 lbs. per hour @ 10 ft.
REMOTE CONTROL BOX
8-1/2" DIA. MOUNTING. USE vertical and 10 ft. horizontal.
DIAPHRAGM HL-RC1507 CABLE.
FILTER SIZED • CONTROLS: Fully adjustable proportional
FOR MAXIMUM
AIR FLOW YET AUTOMATIC BLOW-OFF microprocessor based controls.
EASY TO FEATURE KEEPS FILTER LOAD = 10 to 70 seconds
CLEAN OR CLEAN. DO NOT
REPLACE. PROPORTIONAL 0-100%
EXCEED 40PSI
DUMP = automatic
* LONG LASTING • FUNCTION LIGHTS show unit operation
STAINLESS FILTER
STANDARD
MICROPROCESSOR
BASED CONTROL • SOLID STATE RELAY.
FOR MAXIMUM
20" PERFORMANCE AND • MOTOR: 2 stage quiet bypass continuous duty
RELIABILITY
120/60/1, 8 amp motor is 10dB quieter than
TWO (2)
1-1/4" O.D. standard vacuum motor. UL Recognized,
MATERIAL CSA Certified.
24-1/2" INTAKE TUBES.
HEIGHT • ON DEMAND CYCLE CONTROL:
OVERALL
shuts unit down when hopper is full.
SPUN ALUMINUM * LONG LASTING 8-1/2" STAINLESS STEEL
HOPPER ALL WELDED FILTER STANDARD, 325 mesh (43 micron,
AND PROTECTIVE
ANODIZED. .0017 dia.). Install heavy mesh up!
• WEIGHT:25 lbs. Aluminum design.
• HOPPER CAPACITY: 9.1 lbs. Polypro.
• Conveys virgin pellets or regrind. No powders.
300 HOUR (MOTOR RUN TIME)
11-1/2" DIA. REPLACE BRUSHES INDICATOR LIGHT CONTROL BOX INCLUDES:
MOUNTING PLATE, REQUIRES A AND RESET BUTTON
9" DIA HOLE IN YOUR HOPPER 10 FT. GROUNDED 1. Fully adjustable microprocessor control 10 to 70 seconds from
COVER. POWER CORD. outside the control box.
(not shown)
2. Solid state timer and relay.
PIVOTAL DISCHARGE SEAL PLATE WITH COUNTER 3. Circuit breaker mounted on side control box for quick reset.
3" DIA. DISCHARGE SPOUT. WEIGHT. (SEALS TIGHT EVERY TIME) No fuse to replace.
WON'T RESET AUTOMATICALLY TO PURPOSELY
NOTIFY YOU OF A PROBLEM.
MODEL HL-5 To reduce dangerous static 4. ON-OFF Switch.
electricity, connect the ground wire
00
$ 2,680. between your hopper loader and 5. Function indicator lights.
the metal pickup probe in your
6. Automatic on demand cycle control.
material supply. PPE Loaders are
COMPLETE
supplied with vacuum hose that 7. 300 hour replace brushes timer and reset button.
includes a static ground wire.
8. ROHS Compliant.
PPE HL-5 HOPPER LOADERS come complete
with two 36" long x 1-1/4" O.D. inlet material
Stainless Steel probe, two 15 ft. sections of PART NO. DESCRIPTION PRICE
1-1/4" I.D. Grounded vacuum hose (FDA Vacuum Hopper Loader - 900 lb/hr with
approved), hose clamps, air regulator, 22 ft. of HL-5 Proportional Virgin-Regrind Mix & Blow-Off $2,680.00
3/8" air line and operating instructions.
FR1 Nylon Filter 8-1/2" dia (45 micron) $13.50 ea.
(2) 15 ft. Grounded Vacuum FR1F Felt Filter 8-1/2" dia (50 micron) $15.60 ea.
Hose & Hose Clamps
Air Pressure * FR1SS All STAINLESS Steel Filter (43 micron) $16.05 ea.
Regulator with ZX2054 Filter Rubber Gasket $4.30 ea.
gauge and 22 ft.
of 3/8" air hose. 1R236 Motor Brushes (2 per set) $8.70 set
1R236XL Motor Brushes (Long Lasting) $13.55 set
(2) 36" STAINLESS STEEL
Probe (TALP382P) 2M266 Vacuum Motor 120/60/1 $127.60 ea.
Supplied Standard. 15ft Extension Cable 7 Pin Type for remote
HL-RC1507 $180.00 ea.
Control Box mounting (easily field installed)
HL-5PCB Spare Circuit Board for Control Box $282.00 ea.
1-1/4" O.D. Inlet TALP382P 36" Stainless Suction Probe 1-1/4" O.D. $120.00 ea.
Supplied
PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
69