Page 70 - Plastic Process Equipment, Inc

HL-7 VACUUM HOPPER LOADER

AUTOMATIC FILTER BLOW-OFF
1500 LBS. PER HOUR REMOTE MICROPROCESSOR CONTROL!
BUILT TO LAST!
SPUN ALUMINUM VENTED
TOP CAP CLAMPED DOWN BETTER THAN THE COMPETITION!
TO HOLD MOTOR FIRMLY SUPPLIED WITH
IN PLACE.
EASY DISCONNECT
EXTENDABLE 15ft. - SPECIFICATIONS -
CONTROL CABLE.
• CAPACITIES: 1500 lbs. per hour @ 10 ft.
14" DIA. DIAPHRAGM
FILTER SIZED FOR vertical and 10 ft. horizontal.
MAXIMUM AIR FLOW
YET EASY TO CLEAN • CONTROLS: Fully adjustable microprocessor
OR REPLACE.
based controls.
* LONG LASTING LOAD = 10 to 70 seconds
STAINLESS FILTER
AVAILABLE DUMP = automatic
AUTOMATIC
BLOW-OFF • FUNCTION LIGHTS show unit operation
23-1/8" FEATURE KEEPS
1-1/2" O.D. FILTER CLEAN. • SOLID STATE RELAY.
MATERIAL DO NOT EXCEED
INTAKE TUBE. 40PSI • MOTOR: 2 stage quiet bypass continuous duty
120/60/1, 11 amp motor. UL Recognized,
CSA Certified.
• ON DEMAND CYCLE CONTROL:
30-1/8"
HEIGHT MAGNETIC DISCHARGE shuts unit down when hopper is full.
OVERALL
SENSOR REQUIRES NO
ADJUSTMENT • 14" DIA. NYLON DIAPHRAGM FILTER:
SPUN ALUMINUM AREA = 144 sq. in. (45 micron, .0018 dia.)
HOPPER ALL WELDED.
* LONG LASTING 14" STAINLESS STEEL
FILTER optional, 325 mesh (43 micron, .0017
15" DIA. dia.). Install heavy mesh up!
MOUNTING PLATE, REQUIRES A 300 HOUR (MOTOR RUN TIME)
13" DIA HOLE IN YOUR HOPPER REPLACE BRUSHES INDICATOR LIGHT • WEIGHT: 45 lbs. Aluminum design.
COVER. AND RESET BUTTON
• HOPPER CAPACITY: 26 lbs. Polypro.
• Conveys virgin pellets or regrind. No powders.
REMOTE MOUNTED
PIVOTAL DISCHARGE MICROPROCESSOR CONTROL BOX INCLUDES:
5-1/2" DIA. DISCHARGE SPOUT. SEAL PLATE WITH BASED CONTROL 1. Fully adjustable microprocessor control 10 to 70 seconds from
COUNTER WEIGHT. FOR MAXIMUM outside the control box.
(SEALS TIGHT EVERY PERFORMANCE AND
TIME) RELIABILITY 2. Solid state timer and relay.
10 FT. GROUNDED SUPPLIED WITH
POWER CORD. 15FT CABLE. 3. Circuit breaker mounted on side control box for quick reset.
MODEL HL-7 (not shown) No fuse to replace.
WON'T RESET AUTOMATICALLY TO PURPOSELY
NOTIFY YOU OF A PROBLEM.
$ 2,120. To reduce dangerous static 4. ON-OFF Switch.
00
electricity, connect the ground wire
COMPLETE
between your hopper loader and
the metal pickup probe in your 5. Function indicator lights.
6. Automatic on demand cycle control.
material supply. PPE Loaders are 7. 300 hour replace brushes timer and reset button.
PPE HL-7 HOPPER LOADERS come complete supplied with vacuum hose that
includes a static ground wire. 8. ROHS Compliant.
with a 36" long x 1-1/2" O.D. inlet stainless steel
material probe, 15 ft. of 1-1/2" I.D. Grounded
vacuum hose (FDA approved), hose clamps, air
regulator, 22ft of 1/4" air line and operating PART NO. DESCRIPTION PRICE
instructions. Vacuum Hopper Loader - 1,500 lb/hr
HL-7 $2,120.00
with Automatic Filter Blow-Off
15' Grounded Vacuum
Hose & Hose Clamps FR2 Nylon Filter 14" dia (45 micron) $22.25 ea.
Air Pressure Regulator
with gauge and 22ft of FR2F Felt Filter 14" dia (50 micron) $19.00 ea.
*
3/8" air hose. FR2SS All STAINLESS Steel Filter (43 micron) $34.70 ea.
ZX2059 Filter Rubber Gasket $6.40 ea.
TALP36 36" Stainless Steel
Probe Supplied Standard. 2UV66 Motor Brushes (2 per set) $18.55 set
2M433 Vacuum Motor 120/60/1 $157.85 ea.
Probe End Guard
prevents liners from HL-RC1507 15ft Extension Cable 7 Pin Type for remote $180.00 ea.
blocking probe inlet. Control Box mounting (easily field installed)
1-1/2" O.D. Inlet
Supplied HL-4PCB Spare Circuit Board for Control Box $235.00 ea.
TALP36 36" Stainless Suction Probe 1-1/2" O.D. $120.00 ea.
PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
70