Page 68 - Plastic Process Equipment, Inc

HL-4 VACUUM HOPPER LOADER

AUTOMATIC FILTER BLOW-OFF
900 LBS. PER HOUR MICROPROCESSOR CONTROL!
BUILT TO LAST!
SPUN ALUMINUM VENTED
TOP CAP CLAMPED DOWN BETTER THAN THE COMPETITION!
TO HOLD MOTOR FIRMLY
IN PLACE. EASY DISCONNECT
CONTROL CABLE. - SPECIFICATIONS -
EXTENDABLE FOR
REMOTE CONTROL BOX
8-1/2" DIA. MOUNTING. USE • CAPACITIES: 900 lbs. per hour @ 10 ft.
DIAPHRAGM HL-RC1507 CABLE. vertical and 10 ft. horizontal.
FILTER SIZED
FOR MAXIMUM
AIR FLOW YET • CONTROLS: Fully adjustable microprocessor
EASY TO AUTOMATIC BLOW-OFF based controls.
CLEAN OR FEATURE KEEPS FILTER
REPLACE. CLEAN. DO NOT LOAD = 10 to 70 seconds
EXCEED 40PSI DUMP = automatic
* • FUNCTION LIGHTS show unit operation
LONG LASTING
STAINLESS FILTER
AVAILABLE MICROPROCESSOR • SOLID STATE RELAY.
BASED CONTROL
FOR MAXIMUM • MOTOR: 2 stage quiet bypass continuous duty
20" PERFORMANCE AND
RELIABILITY 120/60/1, 8 amp motor is 10dB quieter than
1-1/4" O.D.
MATERIAL standard vacuum motor. UL Recognized,
INTAKE TUBE. CSA Certified.
24-1/2" • ON DEMAND CYCLE CONTROL:
HEIGHT shuts unit down when hopper is full.
OVERALL
• 8-1/2" DIA. NYLON DIAPHRAGM FILTER:
SPUN ALUMINUM AREA = 50.2 sq. in. (45 micron, .0018 dia.)
HOPPER ALL WELDED
AND PROTECTIVE LONG LASTING STAINLESS STEEL FILTER
ANODIZED. * optional, 325 mesh (43 micron, .0017 dia.).
Install heavy mesh up!
• WEIGHT:25 lbs. Aluminum design.
• HOPPER CAPACITY: 9.1 lbs. Polypro.
300 HOUR (MOTOR RUN TIME)
11-1/2" DIA. REPLACE BRUSHES INDICATOR LIGHT • Conveys virgin pellets or regrind. No powders.
MOUNTING PLATE, REQUIRES A AND RESET BUTTON
9" DIA HOLE IN YOUR HOPPER
COVER. 10 FT. GROUNDED CONTROL BOX INCLUDES:
POWER CORD.
(not shown) 1. Fully adjustable microprocessor control 10 to 70 seconds from
outside the control box.
PIVOTAL DISCHARGE SEAL PLATE WITH COUNTER 2. Solid state timer and relay.
3" DIA. DISCHARGE SPOUT. WEIGHT. (SEALS TIGHT EVERY TIME) 3. Circuit breaker mounted on side control box for quick reset.
No fuse to replace.
MODEL HL-4 To reduce dangerous static WON'T RESET AUTOMATICALLY TO PURPOSELY
NOTIFY YOU OF A PROBLEM.
electricity, connect the ground wire
00
$ 1,830. between your hopper loader and 4. ON-OFF Switch.
the metal pickup probe in your
5. Function indicator lights.
material supply. PPE Loaders are
6. Automatic on demand cycle control.
COMPLETE
supplied with vacuum hose that
includes a static ground wire. 7. 300 hour replace brushes timer and reset button.
8. ROHS Compliant.
PPE HL-4 HOPPER LOADERS come complete
with a 36" long x 1-1/4" O.D. inlet material Stainless
Steel probe, 15 ft. of 1-1/4" I.D. Grounded vacuum PART NO. DESCRIPTION PRICE
hose (FDA approved), hose clamps, air Vacuum Hopper Loader - 900 lb/hr
regulator, 22 ft. of 3/8" air line and operating HL-4 with Automatic Filter Blow-Off $1,830.00
instructions.
FR1 Nylon Filter 8-1/2" dia (45 micron) $13.50 ea.
15 ft. Grounded Vacuum FR1F Felt Filter 8-1/2" dia (50 micron) $15.60 ea.
Hose & Hose Clamps
Air Pressure Regulator * FR1SS All STAINLESS Steel Filter (43 micron) $16.05 ea.
with gauge and 22 ft. of ZX2054 Filter Rubber Gasket $4.30 ea.
3/8" air hose.
1R236 Motor Brushes (2 per set) $8.70 set
36" STAINLESS STEEL Probe 1R236XL Motor Brushes (Long Lasting) $13.55 set
(TALP382P) Supplied Standard. 2M266 Vacuum Motor 120/60/1 $127.60 ea.
Probe End Guard 15ft Extension Cable 7 Pin Type for remote
prevents liners from HL-RC1507 Control Box mounting (easily field installed) $180.00 ea.
blocking probe inlet.
1-1/4" O.D. Inlet HL-4PCB Spare Circuit Board for Control Box $235.00 ea.
Supplied TALP382P 36" Stainless Suction Probe 1-1/4" O.D. $120.00 ea.
PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
68