Page 250 - Plastic Process Equipment, Inc

AIR OPERATED GATE CUTTERS

STANDARD DUTY MODELS - CUTS TOUGH PLASTICS

3200 LB. CUTTING ALL TOOLS
9 7/8" LENGTH O.A. with Blades. Standard actuators have a piston-stroke of 1-1/2
PRESSURE
Wt. 3 lbs. 10 ounces. inches (38mm) and deliver rated thrust at 80 psi
2
(5.62 kg/cm ) air input. Units will give positive
operation, with proportionally lower thrust, at inputs
ALL CUTTING PRESSURES 2
CALCULATED MIDWAY ON down to 60 psi (4.22 kg/cm ). Unit can be operated
2
CUTTING BLADE @ 80 P.S.I. at air pressures of 60 to 100 psi (4.22 to 7.03 kg/cm ).
MODEL SP-006/PGC-4
SPECIAL NOTICE STANDARD HAND-HELD Power Pack
You must install an air line filter, with Blade Holder, 5' Hose and Fittings
oiler and regulator between your
air supply and our power units. (Blades not included)
Failure to do this will void your 1 Unit ..........................................$833.65
factory warranty.
2 or more ....................................$801.60
MODEL SP-006F/PGC-4
FOOT SWITCH TYPE with Blade Holder,
Two 5 ft. Hoses with Fittings
3-1/4" BODY DIA. Model SA-2 Blade (Blades & Foot Switch not included)
#3-41K2 LEAF SPRINGS .. $15.15 pr Holder Assy. Only 1 Unit ..........................................$850.50
ALL BLADES 2 or more ....................................$817.80
SA-2 Blade Holder Assembly
AISI-SI Tool Steel. They can be removed for sharpening
and can be reversed for left hand operation 1 or more...................... $136.00
RPGC-4 HH-003 A3X-77

Blade Opening Blade Opening Blade Opening
.625" at Tip .531" at Tip .750" at Tip
.313" at Base .469" at Base .440" at Base
Model RPGC-4 Blades .875" Cutting Model HH-003 Blades .438" Cutting Model A3X-77 Blades 1.200" Cutting
1 Set ............. $156.21 Length 1 Set ............. $550.05 Length 1 Set ............. $270.90 Length
2 or more .......$149.10 25° Angle 2 or more .......$527.40 60° Angle 2 or more .......$259.75 25° Angle

A3X-45 A3X-60 A3X-90

Blade Opening Blade Opening Blade Opening
.6875" at Tip .6875" at Tip .375" at Tip
.625" at Base .375" at Base .375" at Base
Model A3X-45 Blades 1.156" Cutting Model A3X-60 Blades 1.156" Cutting Model A3X-90 Blades .800" Cutting
1 Set ............. $285.20 Length 1 Set ............. $285.20 Length 1 Set ............. $285.10 Length
2 or more .......$273.45 45° Angle 2 or more .......$273.45 60° Angle 2 or more .......$273.40 90° Angle
MODEL 105 FOOT SWITCH MODEL A-202-6 BENCH MODEL DA-1
STAND & CLAMP SAFETY LEVER

Model 105 Model A-202-6 Model DA-1
$115.00 $133.20 $41.65

PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
250