Page 247 - Plastic Process Equipment, Inc
P. 247
AIR OPERATED GATE CUTTERS
STANDARD DUTY MODELS - CUTS TOUGH PLASTICS
ALL CUTTING PRESSURES ALL TOOLS
CALCULATED MIDWAY ON Standard actuators have a piston-stroke of 1-1/2
2000 LB. CUTTING
CUTTING BLADE @ 80 P.S.I. inches (38mm) and deliver rated thrust at 80 psi
PRESSURE (5.62 kg/cm ) air input. Units will give positive
2
9 7/8" LENGTH O.A. operation, with proportionally lower thrust, at inputs
down to 60 psi (4.22 kg/cm ). Unit can be operated
2
with Blades.
2
at air pressures of 60 to 100 psi (4.22 to 7.03 kg/cm ).
Wt. 2 lbs. 12 ounces.
MODEL SP-003/PGC-4
STANDARD HAND-HELD Power Pack
with Blade Holder, 5' Hose and Fittings
(Blades not included)
1 Unit ........................................ $593.95
2 or more ....................................$571.10
2-1/4" BODY DIA. MODEL SP-003F/PGC-4
Model SA-2 Blade FOOT SWITCH TYPE with Blade Holder,
#3-41K2 LEAF SPRINGS .. $15.15 pr Holder Assy. Only Two 5 ft. Hoses and Fittings
(Blades & Foot Switch not included)
SA-2 Blade Holder Assembly 1 Unit ......................................... $643.75
ALL BLADES
1 or more...................... $136.00 2 or more ....................................$619.00
AISI-SI Tool Steel. They can be removed for sharpening
and can be reversed for left hand operation
RPGC-4 HH-003 A3X-77
Blade Opening Blade Opening Blade Opening
.625" at Tip .531" at Tip .75" at Tip
.313" at Base .469" at Base .440" at Base
Model RPGC-4 Blades .875" Cutting Model HH-003 Blades .438" Cutting Model A3X-77 Blades 1.200" Cutting
1 Set ............. $156.21 Length 1 Set ............. $550.05 Length 1 Set ............. $270.90 Length
2 or more .......$149.10 25° Angle 2 or more .......$527.40 60° Angle 2 or more .......$259.75 25° Angle
A3X-45 A3X-60 A3X-90
Blade Opening Blade Opening
Blade Opening .6875" at Tip .375" at Tip
.6875" at Tip .375" at Base .375" at Base
.625" at Base 1.156" Cutting .800" Cutting
Model A3X-45 Blades 1.156" Cutting Model A3X-60 Blades Length Model A3X-90 Blades Length
1 Set ............. $285.20 Length 1 Set ............. $285.20 60° Angle 1 Set ............. $285.10 90° Angle
2 or more .......$273.45 45° Angle 2 or more .......$273.45 2 or more .......$273.40
MODEL 105 FOOT SWITCH MODEL A-202-3 BENCH MODEL DA-1
• 3 port, 2-position, NC. STAND & CLAMP SAFETY LEVER
• Port size: 1/4" NPT
• Pressure range: 0-120 psi
• Temperature: 23-140°F 180° SLOT
• Lubrication: Not required
2 SLOTS
Model 105 Model A-202-3 Model DA-1
IN BASE
$115.00 $104.40 $41.65
PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
247
