Page 246 - Plastic Process Equipment, Inc

AIR OPERATED GATE CUTTERS

STANDARD DUTY MODELS - CUTS TOUGH PLASTICS

850 LB. CUTTING ALL TOOLS
PRESSURE 7" LENGTH O.A. Standard actuators have a piston-stroke of 1-1/2
inches (38mm) and deliver rated thrust at 80 psi
with Blades. (5.62 kg/cm ) air input. Units will give positive
2
Wt. 18 ounces. operation, with proportionally lower thrust, at inputs
2
down to 60 psi (4.22 kg/cm ). Unit can be operated
2
at air pressures of 60 to 100 psi (4.22 to 7.03 kg/cm ).
WITH NEW
SOFT GRIP BODY COVER
MODEL SP-02 STANDARD HAND-HELD
Power Pack with Blade Holder, 5' Hose and
Fittings (Blades not included)
1 Unit .......................................... $382.60
1-3/4" BODY DIA.
2 or more ..................................... $367.90
Special Flat Back PGC-7 NOTE: AIR CUTTERS MODEL SP-02F FOOT SWITCH TYPE
Full Flush Cut Blade These cutters are a non-returnable with Blade Holder, Two 5 ft. Hoses and Fittings
NEW They will be replaced. (Blades and Foot Switch not included)
product, unless they're defective.
ALL BLADES 1 Unit .......................................... $397.20
Blade Opening
AISI-SI Tool Steel. They 2 or more ..................................... $381.95
.438" at Tip can be removed for
.125" at Base sharpening and can be
reversed for left hand #23 Pivot Screw (special ground) .. $16.30
Model PGC-7 Blades 1.000" Cutting operation #21-BK10 Coil Spring (10pk)........$17.70
1 Set ............. $180.05 Length
2 or more .......$172.65 18° Angle
PGC-2 CD-31 CD-11

CASE HARDENED CASE HARDENED
FOR FOR
LONGER LIFE LONGER LIFE
Blade Opening Blade Opening Blade Opening
.500" at Tip .425" at Tip .313" at Tip
.156" at Base .165" at Base .219" at Base
Model PGC-2 Blades .875" Cutting Model CD-31 Blades .750" Cutting Model CD-11 Blades .438" Cutting
1 Set........... $112.55 Length 1 Set........... $120.60 Length 1 Set ..............$107.10 Length
2 or more.... $107.90 18° Angle 2 or more.... $115.65 15° Angle 2 or more ....... $102.70 45° Angle

SJ1-45 SJ1-60 SJ1-90

Blade Opening Blade Opening Blade Opening
.500" at Tip .500" at Tip .375" at Tip
.340" at Base .375" at Base .375" at Base
.800" Cutting .800" Cutting .800" Cutting
Length
Model SJ1-45 Blades Model SJ1-60 Blades Length Model SJ1-90 Blades Length
45° Angle
1 Set ............. $225.05 1 Set ............. $266.10 60° Angle 1 Set ............. $291.55 90° Angle
2 or more .......$215.80 2 or more .......$255.20 2 or more .......$274.60
MODEL 105 FOOT SWITCH MODEL A-202-2 BENCH MODEL DA-1
STAND & CLAMP SAFETY LEVER

Model 105 Model A-202-2 Model DA-1
$115.00 $132.40 $41.65

PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
246