Page 255 - Plastic Process Equipment, Inc

EXTRA LARGE CUTTING JAWS

FOR FAN GATES UP TO 1-1/2" LONG
Part
These PPE Extra Large Cutting Jaws fit the models
Number SP-003, SP-004, SP-005, SP-006, and SP-008 cutters.
A3X-396 They were designed for cutting long Fan gates easily. Blade Opening
.800" at Tip
The 1-1/2" cutting length makes it easy to remove a fan .450" at Base
gate with a single cut. 1.500" Cutting Length
30° Angle
Because of the length, these blades are only available
as a matched set with the blade holder. They must be
factory assembled to assure proper alignment.

INDIVIDUAL POWER PACKS ONLY
for use with A3X-396 Jaws and Holder
CUTTING
PART NO. TYPE PRICE
PRESSURE
SP-003 1,375 lbs Hand Held $509.60 Power Pack
SP-003F 1,375 lbs Foot Switch $547.90

SP-004 1,650 lbs Hand Held $543.95
SP-004F 1,650 lbs Foot Switch $562.55
Model A3X-396 Blades
SP-005 2,000 lbs Hand Held $1,177.90
with Blade Holder
1 Set . . . . . . . $995.95 SP-005F 2,000 lbs Foot Switch $1,160.50
2 or more. . . . $955.05 SP-006 2,200 lbs Hand Held $690.00
SP-006F 2,200 lbs Foot Switch $769.95
NOTE: AIR CUTTERS SP-008 2,800 lbs Hand Held $1,228.50
These cutters are a non-returnable
product, unless they're defective.
They will be replaced. SP-008F 2,800 lbs Foot Switch $1,246.50

3-IN-ONE® PNEUMATIC TOOL OIL

To extend the life of your tools, you can
®
count on 3-IN-ONE Pneumatic Tool Oil.
• Professional grade formula quickly 3-IN-ONE Professional Grade Pneumatic Tool Oil is
dissolves gum and sludge. proven to quickly dissolve gum and sludge and remove
calcium build up and moisture from pneumatic tools and
• Removes calcium build-up and
equipment, keeping them in working order and extending
moisture for improved tool tool life. This pneumatic tool oil delivers lubrication and
performance.
protection for smooth starts and stops, and comes with a
• Waterproof formula minimizes rust Marksman Twist Spout for mess-free, precision application.
formation under extreme conditions. By removing calcium build-up while minimising rust formation,
the 3-IN-ONE Professional Grade Pneumatic Tool Oil
• Marksman spout for easy precision
helps improve tool performance, so you tackle the project at
application. hand with confidence.
• Ideal for all types of pneumatic tools.
Part No. 31PNEU4
• 50-state VOC compliant.
• Convenient 4-ounce size. $4.25 ea.

PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
255