Page 249 - Plastic Process Equipment, Inc

AIR OPERATED GATE CUTTERS

DOUBLE-STAGE POWER PACKS CUTS TOUGHER PLASTICS

ALL TOOLS
11-1/2" LENGTH O.A. with Blades. SMALLER BODY DIAMETER Standard actuators have a piston-stroke of 1-1/2
Wt. 2 lbs. 13 ounces. Features a two-stage air cylinder inches (38mm) and deliver rated thrust at 80 psi
2
3500 LB. CUTTING which delivers almost twice the (5.62 kg/cm ) air input. Units will give positive
operation, with proportionally lower thrust, at inputs
PRESSURE power as our standard model of the down to 60 psi (4.22 kg/cm ). Unit can be operated
2
same size. Easier to handle. at air pressures of 60 to 100 psi (4.22 to 7.03 kg/cm ).
2
MODEL SP-005/PGC-4
STANDARD HAND-HELD Power Pack
with Blade Holder, 5' Hose and Fittings
(Blades not included)
1 Unit ...................................... $1,265.50
2 or more ................................ $1,231.75
MODEL SP-005F/PGC-4
2-1/2" BODY DIA. Model SA-2 Blade FOOT SWITCH TYPE with Blade Holder,
Holder Assy. Only Two 5 ft. Hoses and Fittings
#3-41K2 LEAF SPRINGS .. $15.15 pr (Blades & Foot Switch not included)
SA-2 Blade Holder Assembly 1 Unit ...................................... $1,281.45
1 or more...................... $136.00 2 or more ................................ $1,247.30
ALL BLADES
ALL CUTTING PRESSURES
AISI-SI Tool Steel. They can be removed for sharpening CALCULATED MIDWAY ON
and can be reversed for left hand operation
CUTTING BLADE @ 80 P.S.I.
RPGC-4 HH-003 A3X-77

Blade Opening Blade Opening Blade Opening
.625" at Tip .531" at Tip .750" at Tip
.313" at Base .469" at Base .440" at Base
Model RPGC-4 Blades .875" Cutting Model HH-003 Blades .438" Cutting Model A3X-77 Blades 1.200" Cutting
1 Set ............. $156.21 Length 1 Set ............. $550.05 Length 1 Set ............. $270.90 Length
2 or more .......$149.10 25° Angle 2 or more .......$527.40 60° Angle 2 or more .......$259.75 25° Angle

A3X-45 A3X-60 A3X-90

Blade Opening
.6875" at Tip Blade Opening Blade Opening
.625" at Base .6875" at Tip .375" at Tip
1.156" Cutting .375" at Base
Model A3X-45 Blades .375" at Base
Length .800" Cutting
1 Set ............. $285.20 Model A3X-60 Blades 1.156" Cutting Model A3X-90 Blades
45° Angle Length
2 or more .......$273.45 1 Set ............. $285.20 Length 1 Set ............. $285.10
2 or more .......$273.45 60° Angle 2 or more .......$273.40 90° Angle
MODEL 105 FOOT SWITCH MODEL A-202-4 BENCH MODEL DA-1
• 3 port, 2-position, NC. STAND & CLAMP SAFETY LEVER
• Port size: 1/4" NPT
• Pressure range: 0-120 psi
• Temperature: 23-140°F 180° SLOT
• Lubrication: Not required
2 SLOTS
Model 105 Model A-202-4 Model DA-1
IN BASE
$115.00 $132.40 $41.65

PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
249