Page 736 - Plastic Process Equipment, Inc

QTC15 HOT RUNNER CONTROL

MICRO PRECISION SERIES

“THE NEW STANDARD IN PERFORMANCE AND SIZE”

Micro Precision Series - The New Standard Expanded Feature Set
PPE's KTC15 & QTC15 are the new standard for Hot Runner The QTC15 offers advanced features unlike any other modular hot
Controls. They are fully loaded with advanced features in the most runner control. It is a full communication type control which features
compact units available. A 48 Zone system stands only 26” in height. global functions that allow the temperature to be set on one unit,
Advanced fuzzy logic with PID algorithms provide precise and then sent to all the zones with the push of a few buttons. Modules
reliable control with accuracy of ±1°F. can be placed in up to 4 groups for more flexibility. The
communication feature of the Micro Precision Series also provides
Easy to Operate the following capabilities: Even Temperature Rise and Thermocouple
The Micro Precision Series front panels are simple and informative. Slaving. Hot swappable modules not only allow the QTC15 to be
Dual LED displays show process and setpoint values simultaneously replaced quickly in the event of a problem, but the main frame will
and provide error indication. Individual LED’s indicate the mode the download the previous temperature setpoint and settings to the
controller is in. The simple keypad with audible response provides new module with no user action required.
easy access to Current and Voltage displays, Mode Selection,
Parameters, Setpoint adjustments, and power ON/OFF.
2 YEAR WARRANTY
SMALLER MODULES & MAINFRAMES
REDUCE SPACE REQUIREMENTS

–FEATURES–
• Energy saver power control • Real-time diagnostics fault
algorithms with fuzzy logic detection:
intelligence. Open, reverse, shorted
• Automatic Soft Start to and pinched T/C
prolong heater life and Over/under temperature
moisture bake out. Shorted triac or heater
• Over current protection. Opened triac or heater
• High voltage T/C input Over current
protection. • Fuse Protected Triac.
• Short triac protection. • Blown AC Input Fuse Indication.
• Anti-arcing protection. • Automatic power response to
• 208-240VAC (50Hz or any heater type or size.
60Hz). • Dual display: Set Point, Process
• Degrees °C or °F. Temperature, Percent Power,
• Power response time Parameters and Faults, Amps
<0.073 sec. and Volts
• Accuracy +/- 1°F. • Audible alarm with inhibit.
• Bumpless control for TC • Security lock-out of front panel.
Break hold. • Software T/C linearizing for cold
• Electrically isolated with junction compensation.
grounded front panel for • Type J and Type K
operator safety. • 15 Amp, 240 VAC
• Zero crossing triac • Operating Range: 32-999°F
triggering for minimum RFI. • External Alarm Output
• Plug-in design for module • Module Size: 1.5” width x 5.7”
interchangeability. height
SPECIAL SALE Model QTC15 Adds: SPECIAL SALE
MODEL KTC15 • Global Settings (sends the following MODEL QTC15
settings to all or grouped controllers):
1-11 ......... $280.00 Set Point, Parameters, Power-On, 1-11 ......... $300.00
12+ .......... $270.00 Start, Halt, Standby and Boost 12+ .......... $290.00
• Live-Swap Zone Retrievable Settings
$ 255 .00 ea. • Start & Halt keys $ 275 .00 ea.
• Even Temperature Rise
• T/C Slaving * QTC15 Modules require QMF Micro
• Remote Standby Input Precision Mainframes for proper fit.
PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
736