Page 589 - Plastic Process Equipment, Inc

PLASTIC HOSE CLAMPS

LOW COST - DEPENDABLE - INSTALLS QUICKLY

A-B
C

“A” Clamp completely closed. excluding
ridge. Average of the three angles. 11 SIZES
“B” Same as “A” except with two teeth
D engaged. IN STOCK!
Dimensions may vary + -.025 (6mm)
CAUTION WHEN ORDERING: Hose O.D. increases
when you insert plug. Measure accordingly.
• Material - Glass Filled Extra Tough
Hose Unit SALE
Effective Clamp Range ONE Nylon 6/6 Black.
PRICES
Part No. O.D. of C D
LOW PRICE
measure Min. A Dia. Max. B Dia.
Size • Color - Black
in. .468 .547 .220 .070
/
M30 1/2" $.10 $.05
mm 11.9 13.9 5.6 1.8 • Heat Stable Good to 470° F.
in. .531 .609 .220 .070
/
M32 9/16" $.10 SOLD OUT • Rated Working Pressure 225 PSI.
mm 13.5 15.5 5.6 1.8
in. .593 .656 .220 .070
/
M38 5/8" $.13 $.06 • Installs Easily With Pliers.
mm 15.1 16.7 5.6 1.8
in. .658 .798 .220 .070 • Quick Ratchet Closure.
/
M44 3/4" $.13 SOLD OUT
mm 16.7 20.3 5.6 1.8
in. .766 .875 .220 .070 • Specific Take-up Eliminates
/
M50 13/16" $.14 $.06 Excessive Tightening.
mm 19.5 22.2 5.6 1.8
in. .875 1.016 .220 .070
/
M56 7/8" $.14 $.06 • Lateral Effort Disengages Ratchet.
mm 22.2 25.8 5.6 1.8
in. .953 1.109 .310 .070 • Allows Application After Connection
/
M62 1" $.18 $.07
mm 24.2 28.2 7.9 1.8 of Hose.
in. 1.031 1.173 .310 .070
/
M68 1-1/8" $.18 SOLD OUT • Clamp Stays in Place During
mm 26.2 29.8 7.9 1.8
in. 1.173 1.421 .310 .070 Installation.
/
M80 1-1/4" $.20 $.07
mm 29.8 36.1 7.9 1.8 • Will Not Rust or Corrode.
in. 1.421 1.609 .360 .070
/
M92 1-1/2" $.20 $.08
mm 36.1 40.9 9.1 1.8 • Stable In a Wide Variety of
in. 1.593 1.812 .360 .070 Chemicals Including Salts, Alcohols,
/
M104 1-3/4" $.20 $.08
mm 40.5 46.0 9.1 1.8 Detergents, High Temperature
in. 1.687 1.954 .360 .070
/
M114 1-7/8" $.24 $.08 Fluids, Oils and Greases.
mm 42.8 49.6 9.1 1.8
in. 1.875 2.125 .400 .070
/
M124 2" $.24 $.08
mm 47.6 54.0 10.2 1.8
in. 2.125 2.375 .400 .070
/
M134 2-1/4" $.26 $.08
mm 54.0 60.3 10.2 1.8
Clamp Kit Available #MK251 . . . . . . . . . . . . $75.00 ea.SOLD OUT
Model MK251 Plastic Clamp Kit contains 251 Hose Clamps in 17 different
sizes from 1/4” to 2 1/4” diameters in a rugged plastic case fully marked Deformation Under Load D-621 %
including instructions. (4,000 psi, 122°F) 1.1
Deflection Temperature
ASTM ENGLISH 264 psi (4) D-648 °F 470
PROPERTY VALUE
METHOD UNITS D-256 ft.lb./in.
Specify Gravity D-792 1.22 Izod Impact Strength, Dry 0.9
1/4" bar, 73°F
Tensile Strength D-638 psi 1/8" bar, 73°F 0.7
73°F Dry 15,000 Unotched 1/8" bar, 73°F 5.0
50% RH 12,000 D-789 °F 500
100% RH 7,500 Melting Point
Elongated at Break D-638 % Coefficient of Linear D-696 in./in./°F
73°F Dry 2.1 Thermal Expansion 1.5x10 -5
50% RH 8.1 Water Absorption D-570 %
100% RH 11.4 73°F/24 Hours 1.0
Shear Strength, Dry D-732 psi 11,000 Saturation 7.1
Flexural Modulus D-790 psi Rockwell Hardnes D-785 M scale
73°F Dry 700,000 M, Dry 95
50% RH 400,000 M, 50% RH 84
100% RH 250,000 R, Dry 122
Compression Strength, Dry D-695 psi 25,000 R, 50% RH 113
PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
589