Page 585 - Plastic Process Equipment, Inc

OETIKER 2-EAR CLAMPS

ZINC PLATED OR STAINLESS STEEL

ISO 9001
MANUFACTURED IN A
TECHNICAL INFORMATION QUALITY SYSTEM CERTIFIED
FACILITY.
MATERIALS:
1008/1010 carbon steel tubing, zinc-plated
or 300 series stainless steel tubing.
PRESSURE:
As a guideline, Oetiker 2-Ear Clamps are in use on our
own production machinery hose and successfully seal at
54 bar - 800 psi with 35 pulsating strokes per minute.
Oetiker 2-Ear Clamps are especially suited for factory
maintenance or heavily vibrating equipment. This is a
medium pressure clamp and is widely used for
maintenance and OEM applications. Rubber hose,
plastic tubing, coaxial and electrical cable, rope, etc. are
LOWEST all easily clamped. These clamps are installed on air, fluid,
gas and steam lines. The one piece design offers a
PRICES positive, tamper-proof seal without damage to the hose.
Oetiker 2-Ear Clamps assure adequate closure and
compensate for tolerance variations in hose sizes. While
IN STOCK both ears must be closed, 2-Ear Clamps are best installed
when one ear is closed all the way first. The second ear is
NOTE: When ordering your 2-Ear Clamps select nominal clamp size then closed so that the first ear opens slightly (gap to be
nearest to, but always larger than, O.D. of material to be clamped after approx. 1.5 mm). This builds a resilient strength into the
insert has been fitted. Please order by part number and size! clamp in a spring-like action to hold against pressure
Dimensions listed below are for zinc plated and stainless steel clamps. changes or aging. Also suitable for low-pressure
Stainless steel clamps have slightly thinner wall thickness. hydraulic applications.

CLAMPING RANGES WIDTH ZINC PLATED STAINLESS STEEL CLAMPS
NOMINAL PER
SIZE INCHES MILLIMETERS IN. MM PART PRICES EA. PART PRICES EA.
CLOSED-OPEN CLOSED-OPEN NO. 1-99 100+ NO. 1-99 100+ BAG
3/16" .118 - .197 3-5 .197 5 EC0305 $.29 $.27 EC0305R $.39 $.37
1/4" .197 - .276 5-7 .236 6 EC0507 $.29 $.27 EC0507R $.39 $.37
5/16" .276 - .354 7-9 .276 7 EC0709 $.29 $.27 EC0709R $.40 $.38
3/8" .315 - .433 8-11 .276 7 EC0811 $.31 $.29 EC0811R $.41 $.39
500
1/2" .433 - .512 11-13 .276 7 EC1113 $.32 $.30 EC1113R $.43 $.41
9/16" .512 - .591 13-15 .295 7.5 EC1315 $.34 $.32 EC1315R $.45 $.43
19/32" .544 - .669 15-17 .315 8 EC1517 $.34 $.32 EC1517R $.50 $.48
5/8" .591 - .708 15-18 .315 8 EC1518 $.34 $.32 EC1518R $.53 $.51
3/4" .669 - .787 17-20 .335 8.5 EC1720 $.37 $.35 EC1720R $.59 $.56
13/16" .748 - .866 19-22 .354 9 EC1922 $.53 $.51 EC1922R $.63 $.60
7/8" .787 - .905 20-23 .354 9 EC2023 $.43 $.41 EC2023R $.65 $.62
250
15/16" .866 - .984 22-25 .394 10 EC2225 $.64 $.61 EC2225R $.70 $.67
1" .905 - 1.063 23-27 .394 10 EC2327 $.50 $.47 EC2327R $.75 $.71
1-1/16" .984 - 1.102 25-28 .394 10 EC2528 $.52 $.49 EC2528R $.78 $.74
1-1/8" 1.063 - 1.220 27-31 .394 10 EC2731 $.53 $.50 EC2731R $.85 $.81
1-3/16" 1.102 - 1.220 28-31 .394 10 EC2831 $.55 $.52
1-5/16" 1.220 - 1.339 31-34 .394 10 EC3134 $.71 $.68 EC3134R $.96 $.91
1-7/16" 1.339 - 1.457 34-37 .394 10 EC3437 $.60 $.57 EC3437R $1.01 $.96 100
1-1/2" 1.457 - 1.575 37-40 .394 10 EC3740 $.95 $.91 EC3740R $1.06 $1.01
1-5/8" 1.575 - 1.693 40-43 .394 10 EC4043 $1.16 $1.11 EC4043R $1.11 $1.06
1-3/4" 1.693 - 1.811 43-46 .394 10 EC4346 $1.18 $1.13 EC4346R $1.14 $1.09

PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
585