Page 450 - Plastic Process Equipment, Inc
P. 450
THREAD REPAIR INSERTS & KITS BY
FOR FAST PERMANENT REPAIR OF DAMAGED RECOIL
PLATEN HOLE THREADS ISO-9001
MANUFACTURED IN A
QUALITY SYSTEM CERTIFIED
FEATURES FACILITY.
• 18-8 TYPE 304 STAINLESS STEEL.
• SIMPLE AND EASY TO USE.
• MAXIMUM ASSEMBLY STRENGTH.
• REDUCED THREAD WEAR.
• CORROSION RESISTANT.
• DESIGN FLEXIBILITY.
• STRONGER ASSEMBLIES.
REPAIR KITS CONSIST OF HIGH QUALITY STI HSS TAP,
INSERT TOOLS, INSERTS AND INSTRUCTIONS; ALL COME • TEMPERATURE RATING: 800°F (425°C)
IN A REUSABLE BOX. SOME INCLUDE DRILL BIT. • LOW COST.
THREAD INSERTS DRILL BIT PPE PRICE • WEIGHT SAVING.
SIZE PER KIT INCLUDED PART NO. EACH • INTERCHANGEABLE WITH OTHER HELICALLY WOUND
4 - 40 10 NO RC33540 $29.05 SYSTEMS (HELI-COIL, PERMA THD., FEDERAL, ETC...)
5 - 40 10 NO RC33550 $41.50 • BETTER THAN ORIGINAL IN MOST APPLICATIONS.
6 - 32 15 YES RC33560 $26.00
8 - 32 15 YES RC33580 $26.20 BULK THREAD REPAIR INSERTS
10 - 24 15 YES RC33600 $27.55 THREAD INSERT PPE PRICE EACH
12 - 24 10 NO RC33620 $48.15 SIZE LENGTH PART NO. 1-23 24+
1/4 - 20 15 YES RC33040 $28.10 1/4 - 20 .375" RC03043 $.25 $.24
5/16 - 18 15 YES RC33050 $30.10 1/4 - 20 .500" RC03044 $.27 $.26
3/8 - 16 15 YES RC33060 $32.95 3/8 - 16 .563" RC03063 $.25 $.24
7/16 - 14 10 YES RC33070 $34.40 3/8 - 16 .750" RC03064 $.33 $.32
1/2 - 13 10 NO RC33080 $40.90 1/2 - 13 .750" RC03083 $.39 $.37
9/16 - 12 6 NO RC33090 $51.10 1/2 - 13 1.000" RC03084 $.54 $.51
5/8 - 11 6 NO RC33100 $59.10 5/8 - 11 .983" RC03103 $.91 $.87
3/4 - 10 6 NO RC33120 $72.00 5/8 - 11 1.250" RC03104 $1.15 $1.10
7/8 - 9 5 NO RC33140 $117.55 3/4 - 10 1.125" RC03123 $1.30 $1.25
1 - 8 5 NO RC33160 $147.90 3/4 - 10 1.500" RC03124 $1.58 $1.51
1 1/8 - 7 5 NO RC33180 $179.45 1 - 8 1.500" RC03163 $2.27 $2.26
1 1/4 - 7 5 NO RC33200 $219.00 1 - 8 2.000" RC03164 $2.87 $2.74
1 3/8 - 6 5 NO RC33220 $230.80 1 1/4 - 7 2.000" RC03204 $5.28 $5.06
1 1/2 - 6 4 NO RC33240 $316.70 1 1/2 - 6 2.500" RC03245 $8.99 $8.60
M12x1.75 6 YES MR35120 $42.95 M12x1.75 18.0mm MR05123 $.58 $.56
M14x2 6 NO MR35140 $58.75 M14x2 21.0mm MR05143 $.94 $.90
M16x2 6 NO MR35160 $68.35 M16x2 24.0mm MR05163 $1.23 $1.17
M20x2.5 6 NO MR35200 $72.00 M20x2.5 30.0mm MR05203 $2.05 $1.96
M24x3 5 NO MR35240 $175.70 M24x3 36.0mm MR05243 $3.07 $2.93
Thread pack insert length is 1.5 times the screw diameter.
Other length inserts can be purchased separately.
Drill Tap Install Tang Removal
Drill to clear out the dam- Thread insert tap supplied. Wind insert in with light Remove tool and sit back
Repair Kit MR35240 shown. aged thread (if necessary). Tap thread should match downward pressure until on top of tang.
up with bolt. 1/4 to 1/2 turn below Tap down
surface, driving tang sharply. Do
towards bottom of the hole. not try to
IN STOCK twist tang off.
Sparkplug and large fine
READY TO ORDER! threads, use long nose
pliers and pull tang out.
PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
450
