Page 449 - Plastic Process Equipment, Inc
P. 449
PLATEN THREAD HOLE SAVER INSERTS
FOR FAST REPAIR OF WORN OR DAMAGED PLATEN THREADS
FOR EASY FAST TEMPORARY
REPAIR OF MOST PLATEN
HOLE THREADS
PPE Repair Inserts are not hardened and
can easily be replaced if damaged.
Installation is made simple with the use of
standard drills, taps & socket hex keys.
Inserts are zinc plated to avoid rust.
- TYPICAL INSTALLATION
INSTRUCTIONS - NOTE: All Inserts are 1-1/2” long.
FOR 5/8 - 11 INSIDE THREAD
Insert Drill Tap Tap Min. Hex Key INSERT Prices Each
Drill out damaged threads with a 7/8” dia. I.D. Size Size Part No. Hole Size Part No.
Thread Req'd. Req'd. Req'd. Depth Req'd. 1-24 25+
drill to a depth of 1-1/2”. Tap new hole with
INCHES
a 1”-8 thread tap. Install thread repair insert
1/2"-13 21/32" 3/4"-10 RHT3410 1-1/2" 3/8" TR1213 $4.15 $3.95
with hex end towards bottom of platen hole
5/8"-11 7/8" 1"-8 RHT0108 1-1/2" 1/2" TR5811 $4.65 $4.35
using a 1/2” hex socket key. Insert can be
locked in place by peening or drilling a 1/8” 3/4"-10 1-7/64" 1 1/4"-7 RHT1147 1-3/4" 5/8" TR3410 $5.00 $4.70
dia. hole thru the matching thread and 1"-8 1-13/32" 1 1/2"-12 RHT1122 2" 3/4" TR1008 $6.40 $6.05
Square
driving in a soft steel pin or thread locking METRIC
compound can also be used. 12x1.75mm 21/32" 3/4"-10 RHT3410 1-1/2" 3/8" TR12134 $6.05 $5.75
16x2.0mm 7/8" 1"-8 RHT0108 1-1/2" 1/2" TR162 $6.30 $6.00
For sizes over 3/4” we suggest a Hardened
20x2.5mm 1-3/32" 1 1/4"-7 RHT1147 1-3/4" 5/8" TR2025 $6.30 $6.00
Thread Repair Insert like our Recoil type
3/4"
NOT a soft Hole Saver Insert. 24x3.0mm 1-13/32" 1 1/2"-12 RHT1122 2" Square TR243 $6.50 $6.20
THREAD PITCH GAUGES
SAE OR METRIC
• The correct pitch is determined by matching the pitch gauge teeth with the internal or external threads.
• Narrow design for use in determining internal or external thread pitches.
• Locking device at each end to secure the entire set for storage or for securing for individual gauge use.
• Each English or Metric Pitch Gauge is clearly marked with pitch size.
PART TYPE OF PITCH SIZES PRICE
NO. PITCH EACH
Metric .40, .50, .75, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00,
5617 $9.90
18 sizes 3.50, 4.00, 4.50, 5.00, 5.50, 6.00, 6.50, 7.00
Metric .25, .30, .35, .40, .45, .50, .55, .60, .65, .70, .75, .80,
5625 .85, .90, 1.00, 1.10, 1.20, 1.25, 1.30, 1.40, 1.50, 1.60, $12.75
28 sizes
1.70, 1.75, 1.80, 1.90, 2.00, 2.50
SAE 4, 4.5, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 18, 19, 20,
28 sizes 22, 24, 25, 26, 28,30, 32, 36, 40, 48, 60, 62
W8655 $7.95
Metric .25, .30, .35, .40, .45, .50, .60, .70, .75, .80, .90, 1.00,
24 sizes 1.25, 1.50, 1.75, 2.00, 2.50, 3.00, 3.50, 4.00, 4.50,
5.00, 5.50, 6.00
DON'T GUESS – BUY A GAUGE!
PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
449
