Page 120 - Plastic Process Equipment, Inc

OPTI-THERM PM HEAT TRANSFER FLUID
®

NON-FOULING, NON-TOXIC FOR CLOSED-LOOP HEATING TO 600°F
GOOD! - FEATURES -
®
OPTI-THERM PM Heat Transfer Fluid is rated • Highly efficient heat transfer to 600°F.
for optimal service range from 150°F to 600°F. It • Low viscosity requires less energy to pump it.
is highly efficient, thermally stable and cost Uses lower horsepower pumps.
effective. It is a completely non-toxic NF/USP • Excellent BTU/GPM capabilities.
grade white mineral oil, and is NSF HT1 • Stable Non-carbonizing, Non-corrosive.
rated for incidental food contact. Unlike
conventional heat transfer fluids, it will • Will not cause hard carbon formation on heated
surfaces.
not cause hard carbon formation on
heated surfaces especially electrically • Completely Non-toxic. NSF HT1 rated for incidental
heated oil units normally used in our food contact.
industry. UL Recognized. • Colorless, tasteless & odorless.
• Non-irritating to skin and eyes.
• High flash (340°F) & flammability (690°F) points.
2 FORMULAS • Insoluble with water.
• Contains virtually no aromatics, heavy metals, or
compounds of sulfur or nitrogen.
QUANTITY PRICES • Disposal: can be combined with other used or
PART NO. FORMULA SIZE contaminated lube oils for recycling. Check your
1 2+
local, state, or federal regulations first.
EPM0405 TECHNICAL 5 GAL. $135.00 ea. $120.00 ea.
EPM0455 GRADE 55 GAL. $1,050.00 ea. $995.00 ea.
PM0605 NSF HT1 5 GAL. $150.00 ea. $135.00 ea. Note: We strongly recommend that copper or copper-bearing
PM0655 RATED 55 GAL. $1,190.00 ea. $1,125.00 ea. materials not be used in hot oil systems. Copper, when in contact
with hot fluid and air, will act as a catalyst causing the fluid to oxidize
Approx. Shipping Weights: 5 Gal. = 40 lbs. / 55 Gal. = 440 lbs. and degrade much more quickly.

®
OPTI-THERM XR HEAT TRANSFER FLUID
OXIDATION RESISTANT, NON-FOULING, LONGER LASTING FORMULA

BETTER! 2 FORMULAS LASTS
®
OPTI-THERM XR Heat Transfer Fluid has UP TO TWICE
substaintial sludge resistance and extended AS LONG AS
service life. This zero-pressure fluid provides - FEATURES - OPTI-THERM PM
®
presice, uniform temperature control to 550°F in • Will not oxidize or form sludge,
closed-loop thermal oil systems where the heat even with prolonged contact with air.
transfer fluid is more than occasionally • Highly efficient heat transfer to 550°F.
exposed to air. It is comprised of a • Low viscosity requires less energy to pump it.
unique high-stability base plus high- Uses lower horsepower pumps.
performance oxidation inhibitor/ • Excellent BTU/GPM capabilities.
stabilizer. Performance is particularly • Stable Non-carbonizing, Non-corrosive.
impressive under the same grueling • Will not cause hard carbon formation on heated
conditions that quickly cause severe surfaces.
oxidation, and sludge formation in • Completely Non-toxic. NSF H1 rated for incidental
conventional heat transfer fluids. XR is food contact.
NSF HT1 rated for incidental food
contact. • Colorless, tasteless & odorless.
• Non-irritating to skin and eyes.
QUANTITY PRICES • High flash point (350°F).
PART NO. FORMULA SIZE
1 2+ • Insoluble with water.
EXR0305 TECHNICAL 5 GAL. $165.00 ea. $150.00 ea. • Contains virtually no aromatics, heavy metals, or
EXR0355 GRADE 55 GAL. $1,295.00 ea. $1,225.00 ea. compounds of sulfur or nitrogen.
• Disposal: can be combined with other used or
XR0505 NSF HT1 5 GAL. $180.00 ea. $165.00 ea. contaminated lube oils for recycling. Check your
XR0555 RATED 55 GAL. $1,415.00 ea. $1,335.00 ea. local, state, or federal regulations first.
Approx. Shipping Weights: 5 Gal. = 40 lbs. / 55 Gal. = 440 lbs.
PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
120