Page 123 - Plastic Process Equipment, Inc
P. 123

MAGNETIC WATER SCALE CONTROL


                                        FOR LIME & SCALE REMOVAL
           WATER
                                    REDUCE SCALE BUILDUP IN PIPES, MOLDS,
        MAGNETS                     HEATING ELEMENTS AND WATER SYSTEMS.


                                                                 • SUPER STRONG RARE EARTH N42
                                                                    MAGNETS!
                                                                 • REQUIRES NO ELECTRICITY AND NO
                                                                    MAGIC BOX AND NO COPPER WIRES.
                                                                 • STEEL CLAMP-ON HOUSING FOCUSES
                                                                    MAGNETIC FIELD ON PIPE!

                                                                 • STAINLESS NUTS & BOLTS.
        We’ve read the claims about how magnets and electronic   • BLACK ELECTRO DEPOSITION FINISH.
        water conditioners soften your water, and all the wild   • CAN BE CLAMPED TO COPPER, STEEL,
        unscientific “facts” about how they work. Here’s what we can  OR PLASTIC PIPES. NO RESTRICTIONS!
        tell you. We tested these magnets with extremely hard water
        on an electric water heater. The heating elements would fail  • DO NOT USE WITH WATER SOFTENERS!
        every 3 months! They would come out caked with scale and
        there would be 6” of scale chips in the bottom of the tank.  but the best we found was a study done at the department of
        After putting one of these magnets on the in water line the  Mechanical and Manufacturing Engineering, Rand Afrikaans
        water heating elements lasted 18 months before we finally  University in South Africa of all places (www.wrc.org.za). It’s
        decided to pull the elements for inspection (they were still  titled “The effectiveness of a magnetic physical water
        working)! There was NO scale on them, instead it looked like  treatment device on scaling in domestic hot-water storage
        a thin coating of melted plastic (it was mineral condensate  tanks”.  They ran 10 different tests and found that the magnets
        from the water not plastic) and instead of tons of chips in the  were effective in suppressing the mass precipitation of scale
        bottom of the tank there were a few chips and a white sludge  in all of their tests.
        that could easily be flushed out!                      The maximum magnetic field at the center of the pipe for
        We then decided to research this to see if we could find out  their tests was 1300gs. Our magnets setup a field strength of
        how they work. The Internet is just full of all kinds of information  3000+gs!

                       GET THE SAME BENEFITS AS THE ELECTRONIC SCALE CONTROL
                           SYSTEMS FOR 1/10TH THE COST!!! AND NO ELECTRIC BILL!






                                         ATTACH TO                                                   ATTACH TO
                                      COLD “WATER IN”                                                “WATER IN”
                                          ON YOUR                                                    ON WATER
                                       WATER HEATER                                                HOLDING TANK
                                                                                                         OR
                                                                                                    SUPPLY LINE.




                                   FITS PIPE                  CAPACITY       N42 MAGNET
                     PART NO.                    MAGNET                                        PRICE
                                      O.D.                 (at center of pipe)  SIZE (mm)
                      SCM075       1/2" to 3/4"    N40          3800gs       38 x 10 x 6.35    $19.80
                      SCM150       1" to 1-1/2"    N40          3500gs       50 x 16 x 6.35    $29.00
                      SCM300         2" to 3"      N40          3300gs       65 x 30 x 6.35    $52.00
                      SCM450       4" to 4-1/2"    N50          3300gs       65 x 40 x 6.35    $79.00
                  PLASTIC PROCESS EQUIPMENT, INC.                                            www.ppe.com
                                                                                            e-mail: sales@ppe.com
                   E 8303 CORPORATE PARK DRIVE         W  6385 MONTESSOURI STREET
                  A MACEDONIA, OHIO 44056-2300         E  LAS VEGAS, NEVADA 89113-1186  Toll Free: USA, Canada & Mexico
                   S 216-367-7000 • FAX: 216-367-7022  S  702-433-6385 • FAX: 702-433-6388  800-362-0706
                   T TOLL FREE: 800-321-0562            T  TOLL FREE: 800-258-8877         Order Fax: 800-223-8305
                                                                                                                 123
   118   119   120   121   122   123   124   125   126   127   128