Page 85 - Plastic Process Equipment, Inc

AIR WIPES - STANDARD OR SUPER

A HARD-HITTING FULL 360° RING OF AIRFLOW
TO BLOWOFF, DRY, CLEAN AND COOL
PIPE, CABLE, HOSE, WIRE OR EXTRUDED SHAPES

— ALL MODELS — Mimimal Air Changing Velocity Performance
Consumption
• Circular design directs constant 360° by Adding Shims
air flow around the entire surface. The compressed air exhausts
• Multiple inside diameters from 3/8” Cap through a gap which is set with a
thru 11” shim positioned between the cap
and the body of the Air Wipe. It is
shipped with a .002" (0.05mm) thick
— STANDARD AIR WIPE — shim installed which works best for
• Good for non-corrosive most applications. Force and flow
enviornments may be easily increased by adding
• Aluminum shims to open the gap. Increasing
• Temperatures to 150°F (66°C) the gap opening offers higher
velocity and harder hitting force. Air
— SUPER AIR WIPES — consumption and noise will be
• Designed for corrosive slightly higher.
enviornments Latching
• Aluminum or Stainless Steel Closure
Aluminum Rated 400°F (204°C) 2 Body Bracket
Stainless Steel Rated 800°F (427°C) STYLES 1/4 NPT Air Supply
• Constructed with stainless steel
screws, shims and stainless wire Air Wipe can be supported by your air flow STAINLESS MODELS
braided hose. supply pipe or the 1/4-20 tapped holes on RATED TO 800°F
the down stream side of the Air Wipe body.

The stainless steel Super Air Wipe is ideal for
food and pharmaceutical applications.
The split design of the Super Air Wipe unlatches The Standard Air Wipe removes liquid from
easily to eliminate threading. Easy on - easy off. a plastic rod. It will cool the rod.

APPLICATIONS ADVANTAGES
• Drying after washing, cleaning, plating or coating • Quiet
• Blowoff dust and contaminants • Low air consumption
• Cool hot extruded shapes • Uniform 360° airflow
• Uniformly wipe surfaces • Stainless steel hardware resists corrosion
• Dry extruded profi les, rod and medical tubing • Aluminum models for temperatures up to 400°F (204°C)
• Eliminate solution carryover - no cross Stainless steel models for temperatures up to 800°F (427°C)
contamination • Stainless steel hose supplied on sizes up to 4" (102mm)
• Blow excess water from automotive door gaskets • No electricity, no moving parts
• Remove excess coatings, water and oil • Non-contact - no wiper blade
• Dry tube, hose, wire, fi ber optics • Split design - compact, rugged, easy to install
• Minimize solution loss due to drag-out • Lightweight, low profile
• Clean paint gun tips • Tapped holes for mounting
• Dry screen printed or ink jetted surfaces • Variable force and flow
• Clean strips and ribbon • Meets OSHA maximum dead end
pressure and noise requirements

PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
85