Page 82 - Plastic Process Equipment, Inc

™
PNEUVAC DRUM PUMP

COMPRESSED AIR POWERED
ISO-9001
Designed to remove liquids, sludge and chips from: QUALITY SYSTEM CERTIFIED
MANUFACTURED IN A
• Molding Machines • Grinders • Open Pits FACILITY.
• Lathes • Screw Machines • Tanks The PneuVac Drum Pump is a simple device that
• Milling Machines • EDM Machines • Spills
• Machining Centers • Coolant Sumps uses a compressed air powered Venturi to create a
vacuum. All you have to do to operate the unit is: attach
the pump and hose to a standard 55-gallon drum, hook
PNEUVAC
DRUM PUMP up your compressed air supply to the pump, insert the
free end of the suction hose into the sump or storage
EXHAUST
VACUUM HOSE AIR COMPRESSED tank and open the air valve.
AIR INPUT
AUTOMATIC
SHUT-OFF
INDUCED VALVE
VACUUM
WASTE
STANDARD LIQUID
55 GALLON
DRUM
WASTE
LIQUID
FLOW
Construction - Entire pump (except ball valve, float and O-
ring), is made from stainless steel. Some competitors' models are
made from rust-prone carbon steels and light-duty plastics.

Easy to Clean - The pump can be completely disassembled
for easy cleaning. Other models are welded together, requiring you
to buy a new pump when it becomes clogged.

Safety - The PneuVac Drum Pump is powered by compressed
air. This eliminates the possibility of electric shocks often associated PneuVac Drum Pump Kit
with motor-driven pumps. The pump is also equipped with an
automatic shut-off valve which activates when the drum is full. Consisting of pump, 1/4" ball valve, automatic shut-off
valve, 10 ft. of smooth-bore hose, quick disconnect drum
fittings, and one 18" aluminum wand.
Speed - The PneuVac Drum Pump can fill a 55-gallon drum in
just 90 seconds. Conventional pumps can take up to one hour to
move the same amount of liquid. MODEL EX6196
(Stainless Steel Pump)
Thoroughness - This pump not only removes liquid but will
also pick up sludge, metal chips and other debris which often clog or Price
wear out impeller type pumps. Additionally, the pump will not lose its $ 25
prime as the liquid level drops, eliminating the need to manually bail 689. ea.
out the bottom of a sump.
Quiet - Unique baffle system limits noise level without compro- Performance Specification Chart
mising performance. Noise levels produced at 100 PSI are within Pressure (PSI) 60 70 80 90 100
OSHA regulations.
Air Consumption (CFM) 5.4 5.8 6.0 6.3 6.5
Reliability - Since there are no moving parts in the PneuVac Vacuum (In Hg) 7.0 7.8 8.5 9.5 10.1
Drum Pump, there are no costly motors or pumps to wear out. The
Noise Level (dB) 90 91 92 92 93
only maintenance required is an occasional cleaning of the check
valve to prevent sticking. Water (Gals/Min) 35 39 42 44 46
Medium Weight Oil (Gals/min) 30 34 37 40 42
Warranty - This product carries a three-year Warranty against
failure due to manufacturing defects. Similar units only carry a one- CAUTION: Do not use PneuVac Drum Pump with flammable or volatile liquids
such as gasoline, alcohol, kerosene, aviation fuel, mineral spirits or any similar
year warranty.
liquids with a low flash point. Air supply should be filtered and oil-free.
PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
82