Page 374 - Plastic Process Equipment, Inc

AIR POPPET VALVES

FOR PART EJECTION ISO-9001

MANUFACTURED IN A
FEATURES QUALITY SYSTEM CERTIFIED
FACILITY.
• Filtered model available to prevent debris from
entering valve.
FILTERED STANDARD
• Eliminate ejection problems with deep molded parts MODEL MODEL
that commonly create gas traps or vacuum conditions.
• Precision ground valve seat eliminates the
possibility of flash entering the valve during injection.
• Valve opens automatically when air pressure is applied.
Max. working pressure: 87 P.S.I. (6 BARS).
Min. working pressure: 21 P.S.I. (1.5 BARS).
• Made from AISI 420 stainless, 50-55 Rc. HOLE DIMENSIONS & INSTALLATION
• Tested to one million cycles. To install Drive in
• 7 diameters available.
C -0.002" Bronze
-0.05 mm
VALVE DIMENSIONS +0.039"
H +1.0 mm C +0.004"
+0.1 mm

ØE
ØA m6 ØB ØA e8
ØA -0.0004" Drive out
-0.01 mm
Drill a hole per the specifications listed. Insert has an undersized portion
to allow partial entry into the drilled hole. Use a bronze block against the
D insert face and drive down into position. To remove, drive out from the
rear.
DIMENSIONS & TOLERANCES
ØA BODY
DIAMETER m6 TOLERANCE e8 TOLERANCE ØB C D H
mm inches mm inches mm inches mm inches mm inches mm inches mm inches
+0.004 +0.0001 -0.004 -0.0001
5.0 0.1969 3.0 0.1181 12.0 0.4724 1.5 0.0591 7.0 0.2756
+0.012 +0.0005 -0.012 -0.0005
+0.006 +0.0002 -0.025 -0.0009
6.0 0.2362 5.2 0.2040 12.0 0.4724 1.5 0.0591 7.0 0.2756
+0.015 +0.0006 -0.047 -0.0017
+0.006 +0.0002 -0.025 -0.0009
8.0 0.3150 6.5 0.2559 12.0 0.4724 1.5 0.0591 7.0 0.2756
+0.015 +0.0006 -0.047 -0.0017
+0.007 +0.0003 -0.032 -0.0013
10.0 0.3937 8.0 0.3150 12.0 0.4724 2.0 0.0787 7.0 0.2756
+0.018 +0.0007 -0.059 -0.0023
+0.007 +0.0003 -0.032 -0.0013
12.0 0.4724 10.0 0.3937 12.0 0.4724 2.5 0.0984 7.0 0.2756
+0.018 +0.0007 -0.059 -0.0023
+0.007 +0.0003 -0.032 -0.0013
16.0 0.6299 13.0 0.5118 20.0 0.7874 3.0 0.1181 12.0 0.4724
+0.018 +0.0007 -0.059 -0.0023
+0.008 +0.0003 -0.040 -0.0016
20.0 0.7874 17.0 0.6693 20.0 0.7874 3.5 0.1377 12.0 0.4724
+0.021 +0.0008 -0.073 -0.0029
STANDARD MODEL
TYPICAL APPLICATION
BODY DIAMETER A ØE
PART NO. PRICE
mm inches mm inches
VA05 5.0 0.1969 4.0 0.1575 $55.25
VA06 6.0 0.2362 4.0 0.1575 $55.25
VA08 8.0 0.3150 4.0 0.1575 $55.25
VA10 10.0 0.3937 8.0 0.3150 $55.25 Air Air
VA12 12.0 0.4724 10.0 0.3937 $59.75
VA16 16.0 0.6299 12.0 0.4724 $64.50
VA20 20.0 0.7874 16.0 0.6299 $72.50
FILTERED MODEL
BODY DIAMETER A ØE
PART NO. PRICE Gas Exit
mm inches mm inches
FV16 16.0 0.6299 14.0 0.5512 $82.00
FV20 20.0 0.7874 18.0 0.7087 $88.00
PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
374