Page 377 - Plastic Process Equipment, Inc

™
VERSASWITCH LIMIT SWITCH

VERIFIES CORE POSITION

GENERAL DESCRIPTION
Versaswitch Limit Switch installs into an injection mold to
™
prevent premature movement of your machine components. By
using the Versaswitch to indicate the location of the core, the
switch prevents the ejector pins from moving while the core is
still in place, eliminating both core and ejector pin damage. The
SPECIFICATIONS Versaswitch limit switch also protects your profits by limiting
Electrical downtime and loss of productivity.
240VAC.....................................5 Amps resistive ™
4 Amps inductive The Versaswitch Limit Switch is easily installed into a
28 VDC 5/8”-24 female thread. The switch actuates when 3.5 lbs of force
Switching................................................... SPDT is applied to the plunger. Actuation height is adjusted by threading
the switch to the correct position in the installation. The switch is
Operating Temperature...................175°F max. held in place via a lockwasher and hex nut. SPDT snap action
(79.4°C max.) switch provides a simple, positive indication of the mold or core
Operating Force.....................3.5 lbs (1.605 kg) location.
Pre-travel to operating point......0.06” (1.5mm)
Overtravel....................................0.01” (.25mm) FEATURES AND BENEFITS
• Prevents costly damage to core and ejector pins.
Rated Current vs. Steel Temperature
V-222 • Over 1 million cycle life provides long dependable service.
Amps °F °C • 175°F (79.4°C) standard temperature rating allows
5.0 85 29.4 installation into most molding applications.
4.0 120 49.0 • Adjustable operating point provides custom installation.
3.0 155 68.3 • Stripped and tinned 6 ft. wire leads make the switch ready
2.0 175 79.4 to install without modification.
• Included mounting hardware installs the Versaswitch limit
MATERIALS switch easily.
Body........................ Anodized Aluminum/ Epoxy
Plunger.........................................Stainless Steel 3/4" HEX NUT
Lockwasher and Nut.................... Stainless Steel 2.8 5/8-24 NEF THREAD
Wire Leads........... 22 ga. stranded, 3-conductor, 14.2 0.11 PLUNGER
0.56
shielded cable, 6 ft. (1.8m) long, Normally
Closed
ends stripped and tinned (red)
12.7 Common
0.50 (white) Normally
Open
(black)
Core Pull 15.2 6.4 Schematic Diagram
Cylinder 0.60 0.25
34.8 mm
Linear =
1.37 inches
Core Pin
Position Plate
PART NO. 1-4 5-9 10+
V-222 $115.00 $111.50 $108.00
The Versaswitch ™ includes: 1 Lockwasher, 1 nut, 2 wire clamps & instructions.
Core Pins 1/4-20 x 13mm/.50" DEEP FROM BOTTOM
OPTIONAL MOUNTING BRACKET 9mm/.36" x 5.6mm/.22" DEEP C’BORE
Optional mounting bracket is available to 5/8-24 NEF 1/4-20
aid installation. Threaded fastener holes 1/2” THRU THRU
facilitate mounting the switch in many
positions. The bracket is made from
corrosion-resistant anodized aluminum. 1”
Part No. VB-222
TYPICAL
APPLICATION Price $37.50 2-1/4”

PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
377