Page 222 - Plastic Process Equipment, Inc

PREMIUM HEATED GATE CUTTER

THE BETTER FOR SMOOTH EASY CUTTING
AND HEAT SEALED GATES
CUTTER!

FEATURES & SPECIFICATIONS BETTER BECAUSE
BLADE OPENING
• 100 to 475°F Cutting Edge Temperature NO ENORMOUS CUTTER HEAD! 1-3/4" AT TIP
(Can be Modified to go up to 650°F) NO UNGROUNDED HEATERS! 1" AT BASE OF
• Heaters are grounded NO OVER LAPPING BLADES! CUTTING EDGE
• Swaged-in Stainless braided leads for durability NO SLOPPY TOLERANCES!
• Lower Replacement Cutter Cost NO MULTIPLE PARTS TO
• Precise Pivot for Better Blade Alignment ADJUST AND ALIGN!
• Cutter Can be Resharpened NO SLIDING BLADES!
• Heat Blocks are Replaceable NO LOCK WASHERS!
• Uses Higher Wattage 1/4" Dia. Heaters NO OVERPRICING!
• Smaller Cutting Head than Competing Models
• Head Width 1-1/2" x .600 High
• Flat Back for Flush Cuts CAUTION: FOR EXTRA SAFETY
• Hot Blades Cut Easier ALWAYS WEAR HEAT RESIS- FLAT BACK
TANT GLOVES WHEN USING
• Heat Seals Cuts A HOT CUTTER. BLADES
30° ANGLE
• Eliminates Cut Cracks
• No Rust Midnight Black Coated

MODEL HGC-K10 HEAVY REPLACEABLE HEATER
DUTY LEAF BLOCKS. IF YOU WEAR
HEATED GATE CUTTER KIT SPRING
OUT THE CUTTER YOU
$ 304. 00 ONLY BUY A NEW
LOWER COST
REPLACEMENT GATE
CUTTER.
(CUTTER CAN ALSO BE
REPLACEMENT RESHARPENED)
GATE CUTTER SPECIAL PLUG ON
MODEL HGC-10 HEATERS MATCH
ONLY RECEPTACLE IN 10" LENGTH O.A.
CONTROL BOX
WT. 16 OUNCES
$ 51. 25
ILLUSTRATED:
MODEL HGC-K10
HEATED GATE
COOL TOUCH
#S-304-AB CUTTER KIT WITH FOAM INSULATED
Replacement CUTTER, HEATERS HANDLE COVERS
Socket AND SOLID STATE ALSO REDUCES
CONTROL BOX OPERATOR FATIGUE

STAINLESS STEEL FOR OPERATOR SAFETY
BRAIDED LEADS A SEPARATE GROUND
LEAD IS ATTACHED TO
HGC-06 RESIST WEAR EACH HEATER SHEATH.
SOLID STATE TEMP. HEATED CUTTER PAD
CONTROL 120/60/1 PHOTO SHOWS THE
BETTER HEATED CUTTER
NOTE:
Fuse Types used: RESTING ON INSULATION
Old Style (silver box): AGC-1 This is a non-returnable product PAD HGC-13
New Style (black box): GMA-1 unless it's defective. It will be replaced.
PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
222