Page 218 - Plastic Process Equipment, Inc

GATE CUTTER RESHARPENING

AND RECONDITIONING SERVICE

BEFORE AFTER
USED CUTTERS SHOW SEVERE WEAR, CHIPPED EDGES AND CUTTERS HAVE BEEN RESHARPENED AND RECONDITIONED
GRIND MARKS FROM CUSTOMER ATTEMPTS TO SHARPEN. TO LIKE NEW QUALITY WITH ONLY A SMALL LOSS OF CUTTER
BLADE LENGTH.
EXTEND
YOUR GATE
CUTTER LIFE NOTE:
HAS BEEN
SOME CUTTERS CAN BE
100% THIS SERVICE RECOMMEND IT BECAUSE
SHARPENED MORE THAN
ONCE. BUT WE DON'T
MINIMUM QUANTITY
FOR RESHARPENING SUSPENDED RESHARPENING MAY
AFFECT THE BLADE
HARDNESS.
IS 12 PIECES
UNTIL
FURTHER
NOTICE.

TERMS • CONDITIONS OUR SERVICE INCLUDES:
1. Minimum quantity for resharpening is 12 pieces. 1. Cutters are thoroughly examined to determine if they
2. Ship your gate cutters United Parcel Service to us in a are salvageable. Our salvage rate is over 80%. Cutters
strong suitable shipping carton. that cannot be repaired will be disposed of to avoid
3. All cutters will be thoroughly examined by us to extra handling and shipping costs.
determine which can be reconditioned (our salvage 2. A complete cleaning and penetrating lubrication is done.
rate is over 80%). All cutters not salvageable will be 3. The pivot joint is adjusted and tightened to insure proper
discarded to avoid extra handling and shipping costs. blade alignment. Pivot is precision pressed not
4. Cutters will be sent to the factory for re-sharpening hammered.
and returned to you within 4 to 8 weeks. 4. Cutting edges and jaw surfaces are sharpened and
5. Please don't send economy nippers for resharpening. honed to insure clean flush cuts.
5. Tips are re-pointed ( A small loss of blade length is
YOU'LL THINK YOU HAVE NEW CUTTERS realized).
FOR LESS THAN HALF THE PRICE! 6. Head is completely repolished.
7. Springs are replaced.
PPE was first to offer you gate cutter reconditioning service! 8. New foam handle grips installed.
But who cares, just send us your cutters and we'll guarantee 9. A final cleaning, inspection and rust protection is
your satisfaction. We are not offering this service for profit, performed.
we're doing it for customer service. 10. All repaired cutters will be stamped with the letter R for
easy identification.
PRICES PRICES
ANY MAKE OR MODEL OF STANDARD PLASTIC GATE CUTTER ANY MODEL OF PPE SUPER LONG LASTING GATE CUTTER
UP TO 8" LONG, RECONDITIONED 5" THRU 10" LONG, RECONDITIONED
$
$
Use Part No. RGC 6. 50 each Part No. RGCSC 8. 50 each

Any 9" or 10" Long Plastic Gate Cutter Carbide Insert Plastic Gate Cutter ANY MODEL OF SWANSTROM PLASTIC CUTTER, RECONDITIONED
Part No. RGC-9 . . . . . . . . . $8.00 ea. Part No. RGC-C . . . . . $16.00 ea. $ 50
Shipping costs of $.50 per gate cutter is added for freight to and from the factory. IT'S WORTH IT! Part No. RGCSW 9. each
PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
218