Page 1103 - Plastic Process Equipment, Inc

T.C. HOLE SPECIFICATIONS

STANDARD T.C. HOLES STANDARD (HMTC) MELT T.C. HOLES

Standard on 1/4-28 RH THD 1/4-28 THD 3/8-24 N.F.
most nozzles Bottoming Tap
0.375

0.187 to 0.125 (min.)
Caution Example shown
is with a 1-5/8”
hex and a 1/2”
.500 Bore dia. internal bore.
A larger bore
requires a
larger hex.

Part No. TC1428 Part No. TC38HM
1-5/8” Hex Flats PRICE: $11.00 PRICE: $25.00
1/8-27 N.P.T. Flat Bottom Tap
1/8-27 N.P.T 3/8-24 N.F.
0.375 to 0.437 max.
Flat Bottom SPECIAL 30° ANGLE
Drill & Tap MELT T.C. HOLE
0.125 (min.) Caution
Example shown
is with a 1-5/8”
.500 Bore hex and a 1/2” Requires 1-7/8”
dia. internal bore.
A larger bore across hex flats
requires a
larger hex.
Part No. TC18PT
1-5/8” Hex Flats PRICE: $11.00
3/8-24 N.F.
3/8-24 N.F.
0.375 to 0.437 max. Flat Bottom
Drill & Tap
0.125 (min.) Caution
Example shown
is with a 1-5/8”
.500 Bore hex and a 1/2”
dia. internal bore.
A larger bore Part No. TC38HMA
requires a
larger hex. PRICE: $32.00
Part No. TC38NF Full Taper Nozzles with 1” or larger rear openings
require 2” hex for HMTC Melt T.C. hole.
1-5/8” Hex Flats PRICE: $11.00
10-32 THD
10-32 THD NEWBURY OEM STYLE T.C. HOLES
0.375
Bottoming Tap
1/8 DIA
0.187 to 0.125 (min.) Through hole with set screw.
Caution Example shown
is with a 1-5/8”
.500 Bore hex and a 1/2”
dia. internal bore.
A larger bore
requires a
larger hex.
Part No.
Part No. TC1032 TCNB18
1-5/8” Hex Flats PRICE: $11.00 PRICE: $17.50

PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
1103