Page 1101 - Plastic Process Equipment, Inc
P. 1101
HOT MELT NOZZLE THERMOCOUPLE
FOR DIRECT TEMPERATURE READINGS OF THE HOT
PLASTIC MELT INSIDE YOUR NOZZLE! TYPE J
&
BOTH MODELS ARE REPLACEABLE AND INTERCHANGEABLE
TYPE K
STYLE F STYLE M
THERMOCOUPLE JUNCTION IS FLUSH IN THERMOCOUPLE JUNCTION IS CENTERED IN
NOZZLE WALL HOT MELT STREAM
Rugged 48” Armored Leads Rugged 48” Armored Leads
3/8 - 24 Thread 3/8 - 24 Thread
Special Lava Seal
Special Lava Seal
1/4” Immersion Depth
PPE STYLE F flush mount T.C. can be installed in most nozzles. PPE STYLE M melt temperature sensing T.C. can be installed in
The special wire junction mounts flush with the internal nozzle bore most nozzles. The special sensing probe protrudes into the center
to avoid obstruction or damming the flow of plastic material. It is of the hot melt stream for precise temperature readings. Some care
completely replaceable and does not require costly welding or must be exercised to avoid damaging the probe. Avoid cold starts
factory replacement. or excessive molding pressure.
PRICES
PRICES
STYLE F, TYPE J Thermocouple #HMTC-F...................... $23.45
STYLE F, TYPE K Thermocouple #HMTCK-F................... $26.15 STYLE M, TYPE J Thermocouple #HMTC-M.................... $24.70
STYLE M, TYPE K Thermocouple #HMTCK-M ................ $27.50
Drilling and Tapping Nozzle ................................................ $26.25 Drilling and Tapping Nozzle ................................................ $26.25
Spare Lava Seal Packing #HMTC-S .................................. $7.35
Spare Lava Seal Packing #HMTC-S .................................. $7.35
Hot Melt T.C. Hole Plug #HMP3824 w/no lava seal .......... $9.00
(Seals T.C. Hole when T.C. is removed)
THREAD PITCH GAUGES
SAE OR METRIC
• The correct pitch is determined by matching the pitch gauge teeth with the internal or external threads.
• Narrow design for use in determining internal or external thread pitches.
• Locking device at each end to secure the entire set for storage or for securing for individual gauge use.
• Each English or Metric Pitch Gauge is clearly marked with pitch size.
PART TYPE OF PITCH SIZES PRICE
NO. PITCH EACH
Metric .40, .50, .75, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00,
5617 $9.90
18 sizes 3.50, 4.00, 4.50, 5.00, 5.50, 6.00, 6.50, 7.00
Metric .25, .30, .35, .40, .45, .50, .55, .60, .65, .70, .75, .80,
5625 .85, .90, 1.00, 1.10, 1.20, 1.25, 1.30, 1.40, 1.50, 1.60, $12.75
28 sizes
1.70, 1.75, 1.80, 1.90, 2.00, 2.50
SAE 4, 4.5, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 18, 19, 20,
28 sizes 22, 24, 25, 26, 28,30, 32, 36, 40, 48, 60, 62
W8655 $7.95
Metric .25, .30, .35, .40, .45, .50, .60, .70, .75, .80, .90, 1.00,
24 sizes 1.25, 1.50, 1.75, 2.00, 2.50, 3.00, 3.50, 4.00, 4.50,
5.00, 5.50, 6.00
PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
1101
