Page 940 - Plastic Process Equipment, Inc

PREMIUM CARTRIDGE HEATER STOCK LIST

STOCKED WITH 10" SWAGED-IN LEADS
MIX OR MATCH SIZES FOR
QUANTITY DISCOUNTS
SHEATH QUANTITY PRICES
DIAMETER VOLTS WATTS W/IN² PART NO.
LENGTH 1-11 12+
8" 240 500 32 P6080-20500 $50.05 $47.25
8" 120 750 48 P6080-10750 $50.05 $47.25
8" 240 750 48 P6080-20750 $50.05 $47.25
8" 240 1000 65 P6080-21000 $50.05 $47.25
8" 240 1500 97 P6080-21500 $50.05 $47.25
8" 240 2000 129 P6080-22000 $50.05 $47.25
9" 240 1800 102 P6090-21800 $53.75 $50.85
10" 240 1000 51 P6100-21000 $58.45 $55.30
10" 240 1500 76 P6100-21500 $58.45 $55.30
10" 240 2000 102 P6100-22000 $58.45 $55.30
3/4" 12" 240 1000 39 P6120-21000 $66.55 $63.00
12" 240 1500 59 P6120-21500 $66.55 $63.00
12" 240 2000 78 P6120-22000 $66.55 $63.00
14" 240 1250 42 P6140-21250 $75.80 $71.70
14" 240 2000 68 P6140-22000 $75.80 $71.70
15" 240 1500 51 P6150-21500 $80.40 $76.10
16" 240 1800 51 P6160-21800 $85.00 $80.45
16" 240 4700 133 P6160-24700 $85.90 $81.30
18" 240 2000 49 P6180-22000 $94.20 $89.15
20" 240 2300 49 P6200-22300 $103.40 $97.90
24" 240 1375 24 P6240-21375 $121.85 $115.30

RECOMMENDED MAXIMUM WATT DENSITIES
200°F 400°F 600°F 800°F 1000°F
GOOD FIT (under .004) 250 w/in² 225 200 150 100
MEDIUM FIT (.005-.009) 175 150 100 75 60
OPEN AIR OR POOR FIT 35 30 25 20 18
IN WATER 250

MANUFACTURING TOLERANCES
Nominal Dia. 1/4" 3/8" 1/2" 5/8" 3/4" Heater Length: ± 3% or ± 3/32" which ever is greater
Min. .244" .369" .494" .619" .744" Camber: ± .025 inch/ft.
Max. .249" .374" .499" .624" .749" Wattage: + 5%, -10%

CARTRIDGE HEATER RELEASE
& HEAT TRANSFER FLUID

Prevents heater seizure.
Watlube provides a barrier to high temperature oxidation, thus
assuring quick heater removal even after extended service.
Improves thermal conductance.
Heat transfers more quickly from heater sheath to the part when
Watlube is used, thus the heater operates at lower temperatures.
However, Watlube is not a substitute for proper fit.
Extends heater life.
Heaters of any wattage will give you longer service with the tighter
fit made practical by Watlube.
Easy to apply. 4 ounce Plastic Bottle with Applicator
Just brush a thin coat on the heater sheath with the applicator
provided. Avoid Watlube contacting the leads or end plug. Part No. HRF-4 . . . . . . . . . . . . $12.25 ea.
PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
940