Page 795 - Plastic Process Equipment, Inc

AUTOMATIC CURRENT INDICATORS

TYPICAL APPLICATIONS & SIZES

REMOTE LED: SPECIFICATIONS
Current Ring Indicator with wire leads.
Part Number CR516WL CR516 & CR516G MB516 .144 (3.70) Dia.
drilled hole, 2
1.04 5/16 (7.94) Dia. places for #6 screw
The CR516WL consists of the same current (26.4) Neoprene Washer (not furnished)
transformers as the basic CR516 except (furnished with
that wire leads are attached in place of the bracket)
LED. The electrical specifications are .781
.95 (24.1) (19.8)
identical to the basic CR516.
1.562
This version provides many varied (39.7)
applications:

REMOTE LED: The leads may be attached
.46 (11.7)
directly to the CRPH for a remote indication
of current flow. A variable resistor (not
furnished) may be installed in one of the CR516WL .203 (5.20) Dia.
leads to change the turn on point of the LED. 1.10 drilled hole
(27.9)
CURRENT METER: The leads may be
attached to a high impedance AC volt meter 12” (305) Long CRPH
to indicate actual current levels. A load #22 AWG Leads
resistor (not furnished) is required to be 12
placed across the two leads.
Indicating range:
2 to 100 amp with one wire pass Current Limiting Resistor
2.5 to 25 amp with two passes
Proportionally more sensitive with additional .062 Min. .125 Max.
.125 Max.
wire passes.
PH31
LED Panel Holder.
Part Number CRPH 12 .16 Maximum
TWO PIECE
This Panel Holder is attached directly to the NTS Panel Thickness ONE PIECE MOUNTING CLIP
RED LENS
CR516WL to provide a remote indication of
current flow. The Panel Holder requires only .39 Dia. REQUIRES A .250 DIA. HOLE
DETECT:
a 1/4 inch diameter hole for mounting. The Open motor starter
holder is constructed from black nylon and Current Limiting Resistor Washer Open motor winding
is held in place with the plastic locking tabs. REQUIRES A .312 DIA. HOLE
A current limiting resistor is installed in one
LED Panel Holder
of the leads. The Panel LED may be
attached with up to 200 feet of #16 AWG
wire.
AC VOLT METER
Detailed technical and installation data is
supplied with each unit. Panel Mounting
Bracket
PATENTS PENDING DETECT:
Small current levels by
INDICATE: passing wire several
Heating element times through device.
operation.
DETECT:
Open control valves.
Open heater
elements.
DETECT: Activation on an
Relay operation. external load.

PROCESS HEATING CONTROL PANEL

PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
795