Page 794 - Plastic Process Equipment, Inc
P. 794

AUTOMATIC CURRENT INDICATORS


                         FOR CONTINUOUS INDICATION OF CURRENT FLOW
                                              TWO TYPES AVAILABLE
                                              1. CURRENT RING WITH BUILT-IN LED    }  RED OR GREEN
        FEATURES:                             2. CURRENT RING WITH REMOTE LED
          Small, compact
          Economical
          Reliable
          High sensitivity
          No additional wiring
          Easy to install
          Rugged
          Negligible power consumption

                  INDICATES
             HEATER FAILURE                        CR516               MB516             CR516WL             CRPH
                IMMEDIATELY                  TYPICAL APPLICATIONS:                 CURRENT RING™ is a small, self-
                                               Load sensing                        contained device used for indicating
                                                                                   electrical current flow. This device provides
                                               Detect power loss
        SPECIFICATIONS:                                                            a safe, economical and efficient way to
                                               Indicate phase loss                 indicate the presence (or absence) of
          Totally encapsulated                 Detect heater current               electrical current flow. A current-carrying
          Outside diameter: .95 inch           Sense ground fault                  wire is passed through the opening in the
          Thickness: .46 inch                  Detect motor operation              center of the device. When current in the
          Maximum number of insulated wires    Indicate open fuses                 wire reaches above the minimum operating
          allowed through opening:                                                 level the Light Emitting Diode (LED)
                                                                                   extending from the device begins to
            One pass: 6 AWG                  CONSTRUCTION:                         illuminate.
            Two passes: 10AWG                CURRENT RING™ is a proprietary design
            Three passes: 12 AWG             current transformer with an integrally  A typical application would be in
            Four passes: 18 AWG              mounted LED.                          troubleshooting an electrical control panel.
                                                                                   The device would be attached to specific
          Minimum watts needed for power:
                                             The current transformer is specially  wires in a control panel. Simply noticing
                                120V  240V   designed to provide maximum secondary  whether the device was illuminated would
          One pass - Red LED 2A  240W 480W   voltage at low primary current levels. The  provide an immediate indication of the
                  Green LED 2.5A  300W 600W  core is designed with special saturation  electrical status of the wire.
          Two passes - Red LED 1A  120W 240W  characteristics to limit its output voltage at
                   Green LED 1.25A 150W 300W  high primary currents. The output of the  Another application would be in a process
          Three passes - Red LED .66A  60W  120W  current transformer is further attenuated  heating system with electrical heaters wired
                    Green LED .83A 75W  150W  with an attached zener diode and resistor.  in parallel. Wires from each heating element
          Illumination is visible up to 60                                         would be routed through the opening in the
                                             The LED is a high efficiency device to  device.  The device would then show
          degrees from center axis of LED
                                             provide maximum light output at low input  immediately which element was in operation
          Storage temperature:
                                             currents.                             and which was open.
           -55°C to +100°C
          Operating temperature:             The entire unit is encapsulated in a hard  The device is supported by the current
           -55°C to +80°C                    plastic housing.                      carrying wire and, if necessary, may be
                                                                                   secured in place with a Nylon tie.
          Color:CR516 - Yellow
               CR516WL - Black
                                                                         — PRICES —
                                                           BUILT-IN                           REMOTE
        ELECTRICAL CHARACTERISTICS:
                                              CR516 Current Ring (Red LED)       CR516WL Current Ring
          Operates at any voltage, 50-60Hz
                                              1-11 Pcs. . . . . . . . . . . . . . . . .  $22.75  1-11 Pcs. . . . . . . . . . . . . . . . .  $18.75
          Completely insulated
                                              12+ Pcs. . . . . . . . . . . . . . . . .  $21.50  12+ Pcs. . . . . . . . . . . . . . . . .  $17.75
          Totally self-contained, requires no
          electrical connection
                                              CR516G Current Ring (Green LED)    CRPH LED (Red) . . . . . . . . . .  $11.50
          Sensitivity in proportion to the number
                                              1-11 Pcs. . . . . . . . . . . . . . . . .  $23.75  CRPHG LED (Green) . . . . . . .  $12.25
          of wire passes through opening
                                              12+ Pcs. . . . . . . . . . . . . . . . .  $22.50  PH31 Splash Proof LED (Red). . . . .  $14.50
          Maximum current: 100 Ampere
                                              MB516 Panel Mounting Bracket . .  $3.95 ea.  PH31G Splash Proof LED (Green) .  $15.25
                  PLASTIC PROCESS EQUIPMENT, INC.                                            www.ppe.com
                                                                                            e-mail: sales@ppe.com
                   E 8303 CORPORATE PARK DRIVE         W  6385 MONTESSOURI STREET
                  A MACEDONIA, OHIO 44056-2300         E  LAS VEGAS, NEVADA 89113-1186  Toll Free: USA, Canada & Mexico
                   S 216-367-7000 • FAX: 216-367-7022  S  702-433-6385 • FAX: 702-433-6388  800-362-0706
                   T TOLL FREE: 800-321-0562            T  TOLL FREE: 800-258-8877         Order Fax: 800-223-8305
        794
   789   790   791   792   793   794   795   796   797   798   799