Page 776 - Plastic Process Equipment, Inc

EAGLE SIGNAL CYCL-FLEX TIMERS
®
FEATURES SPECIFICATIONS (visit www.ppe.com for additional information)
• 15 standard time ranges from 5 seconds to 30 hours. Reset Time: 1/2 second at max. setting
RESET TIMER • Knob adjustable time ranges - progress pointer for Voltage/Frequency:120V (+10, -15%), 50/60 Hz
each. 240V (+10, -15%), 50/60 Hz
HP5 • Highly visible, calibrated dials Burden: Motor: 2.45 VA, 120 VAC
(7.85 inch circumference). Clutch: 10.5 VA
• Easily read and well-spaced calibrations. Output Rating: 10 amps, resistive, 120 VAC
5 amps, resistive, 240 VAC
• Red progress pointer displays remaining time interval.
Electrical Lifetime: Average contact life at full load is 250,000 operations.
• Pilot light indicates when timer motor is energized.
At 1 amp load, switch life increases to 5 million cycles. Inrush current should
• Standard timers supplied with “power on” clutch not exceed 10 amps.
operation.
Power On Response: 28 ms average pull-in, 17 ms average drop-out
• Optional reverse action clutch will not reset on power Temperature Range: 0° to 140°F (-18° to +60°C)
failure.
Vibration: Unaffected by 2.5G sinusoidal vibration magnitudes in both
• 15 terminal ABS (UL rated 94V-0) molded housing directions of three perpendicular mounting axes imposed from 10 to 900 Hz.
has high impact resistance and will not support
combustion. Approximate Weight: 2lb. 14oz.
HP5 Schematic Diagram
BASE PRICE
$ 603. 00 HP5 RECOGNIZED CERTIFIED ® APPROVED
FM
Sym. Description Sym. Description Sym. Description Sym. Description Price
17 0-5 Sec. 2 0-150 Sec. 6 0-60 Min. A6 120V, 60 Hz N/C
15 0-10 Sec. 3 0-5 Min. 7 0-150 Min. B6 240V, 60 Hz $123.00
14 0-15 Sec. 4 0-10 Min. 8 0-5 Hr.
0 0-30 Sec. 18 0-15 Min. 9 0-10 Hr.
1 0-60 Sec. 5 0-30 Min. 10 0-30 Hr.
ISO 9001
FEATURES SPECIFICATIONS MANUFACTURED IN A
MICROPROCESSOR • Five time ranges from 19.999 sec. to (visit www.ppe.com for additional information) QUALITY SYSTEM CERTIFIED
FACILITY.
199 hrs.: 59 min.
TIMER/COUNTER • Two count rates - accept and display Voltage/Frequency: A6 - 120 VAC, 50/60 Hz
B6 - 240 VAC, 50/60 Hz
counts from 1 to 19999.
CX200 • Two relay outputs - socket mounted Time Inhibit/Count Line Voltage/Frequency: B6 - 240 VAC, 50/60 Hz
A6 - 120 VAC, 50/60 Hz
for easy replacement. Setting Accuracy: Time: ±0.1% or 50 ms, whichever is larger Count: 100%
• Two form C instantaneous contacts Repeat Accuracy: Time: ±0.001% of setting or 35 ms, whichever is larger
and two form C programmed Count: 100%
contacts.
Repeat Time: 30 ms following voltage removal from simulated clutch input (CR1)
• Programmed outputs operate in one
of four load sequences; OOX, OXO, Power on Response: 300 ms maximum after voltage applied to terminal 11
OOX with pulse output, and OOX Temperature Range: +32° to 140°F (0° to +60°C)
output with repeat cycle operation.
Output Rating: Relay: 10 amp (resistive), 120 VAC
• Standard start is defined as ON delay Mechanical Life: 20 million operations
reset timer or counter. Electrical Life: contingent upon controlled load
• For standard start units, timer/counter Vibration: Unaffected by 2.5G sinusoidal vibration magnitudes in both directions
resets on power failure. of the perpendicular mounting axes imposed from 10 to 100 Hz.
• Reverse start or OFF delay units will Battery Life: The CX uses a lithium battery with an expected life of 10 years.
not reset on power failure and will
continue cycle when power is
restored. CX200 Schematic Diagrams
CX202 ®
BASE PRICE RECOGNIZED CERTIFIED
$ 657. 00 Sym. Description Price
A6 120V, 50/60 Hz N/C
B6 240V, 50/60 Hz $231.00

DIMENSIONAL MOUNTING
INFORMATION INFORMATION
(both models) (both models)

PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
776