Page 680 - Plastic Process Equipment, Inc
P. 680

OPTI-THERM  PM HEAT TRANSFER FLUID
                                               ®

                    NON-FOULING, NON-TOXIC FOR CLOSED-LOOP HEATING TO 600°F
                       GOOD!                                                        - FEATURES -
                     ®
        OPTI-THERM  PM Heat Transfer Fluid is rated                  • Highly efficient heat transfer to 600°F.
        for optimal service range from 150°F to 600°F.  It           • Low viscosity requires less energy to pump it.
        is highly efficient, thermally stable and cost                 Uses lower horsepower pumps.
        effective. It is a completely non-toxic NF/USP               • Excellent BTU/GPM capabilities.
        grade white mineral oil, and is NSF HT1                      • Stable Non-carbonizing, Non-corrosive.
        rated for  incidental food contact.  Unlike
        conventional heat transfer fluids, it will                   • Will not cause hard carbon formation on heated
                                                                       surfaces.
        not cause hard carbon formation on
        heated surfaces especially electrically                      • Completely Non-toxic. NSF HT1 rated for  incidental
        heated oil units normally used in our                          food contact.
        industry. UL Recognized.                                     • Colorless, tasteless & odorless.
                                                                     • Non-irritating to skin and eyes.
                                                                     • High flash (340°F) & flammability (690°F) points.
               2 FORMULAS                                            • Insoluble with water.
                                                                     • Contains virtually no aromatics, heavy metals, or
                                                                       compounds of sulfur or nitrogen.
                                             QUANTITY PRICES         • Disposal: can be combined with other used or
         PART NO.    FORMULA      SIZE                                 contaminated lube oils for recycling. Check your
                                               1           2+
                                                                       local, state, or federal regulations first.
          EPM0405   TECHNICAL     5 GAL.    $135.00 ea.    $120.00 ea.
          EPM0455     GRADE      55 GAL.  $1,050.00 ea.    $995.00 ea.
          PM0605      NSF HT1     5 GAL.    $150.00 ea.    $135.00 ea.  Note: We strongly recommend that copper or copper-bearing
          PM0655      RATED      55 GAL.  $1,190.00 ea. $1,125.00 ea.  materials not be used in hot oil systems. Copper, when in contact
                                                                      with hot fluid and air, will act as a catalyst causing the fluid to oxidize
               Approx. Shipping Weights: 5 Gal. = 40 lbs. / 55 Gal. = 440 lbs.  and degrade much more quickly.

                                               ®
                  OPTI-THERM  XR HEAT TRANSFER FLUID
                   OXIDATION RESISTANT, NON-FOULING, LONGER LASTING FORMULA

                     BETTER!                                           2 FORMULAS                           LASTS
                      ®
        OPTI-THERM  XR Heat  Transfer Fluid has                                                          UP TO TWICE
        substaintial sludge resistance and extended                                                     AS LONG AS
        service life. This zero-pressure fluid provides                             - FEATURES -     OPTI-THERM  PM
                                                                                                               ®
        presice, uniform temperature control to 550°F in             • Will not oxidize or form sludge,
        closed-loop thermal oil systems where the heat                 even with prolonged contact with air.
        transfer fluid is more than occasionally                     • Highly efficient heat transfer to 550°F.
        exposed to air. It is comprised of a                         • Low viscosity requires less energy to pump it.
        unique high-stability base plus high-                          Uses lower horsepower pumps.
        performance oxidation inhibitor/                             • Excellent BTU/GPM capabilities.
        stabilizer. Performance is particularly                      • Stable Non-carbonizing, Non-corrosive.
        impressive under the same grueling                           • Will not cause hard carbon formation on heated
        conditions that quickly cause severe                           surfaces.
        oxidation, and sludge formation in                           • Completely Non-toxic. NSF H1 rated for  incidental
        conventional heat transfer fluids. XR is                       food contact.
        NSF HT1 rated for  incidental food
        contact.                                                     • Colorless, tasteless & odorless.
                                                                     • Non-irritating to skin and eyes.
                                             QUANTITY PRICES         • High flash point (350°F).
         PART NO.    FORMULA      SIZE
                                               1           2+        • Insoluble with water.
          EXR0305   TECHNICAL     5 GAL.    $165.00 ea.    $150.00 ea.  • Contains virtually no aromatics, heavy metals, or
          EXR0355     GRADE      55 GAL.  $1,295.00 ea. $1,225.00 ea.  compounds of sulfur or nitrogen.
                                                                     • Disposal: can be combined with other used or
          XR0505      NSF HT1     5 GAL.    $180.00 ea.    $165.00 ea.  contaminated lube oils for recycling. Check your
          XR0555      RATED      55 GAL.  $1,415.00 ea. $1,335.00 ea.  local, state, or federal regulations first.
                Approx. Shipping Weights: 5 Gal. = 40 lbs. / 55 Gal. = 440 lbs.
                  PLASTIC PROCESS EQUIPMENT, INC.                                            www.ppe.com
                                                                                            e-mail: sales@ppe.com
                   E 8303 CORPORATE PARK DRIVE         W  6385 MONTESSOURI STREET
                  A MACEDONIA, OHIO 44056-2300         E  LAS VEGAS, NEVADA 89113-1186  Toll Free: USA, Canada & Mexico
                   S 216-367-7000 • FAX: 216-367-7022  S  702-433-6385 • FAX: 702-433-6388  800-362-0706
                   T TOLL FREE: 800-321-0562            T  TOLL FREE: 800-258-8877         Order Fax: 800-223-8305
        680
   675   676   677   678   679   680   681   682   683   684   685