Page 676 - Plastic Process Equipment, Inc

®
OLD BULL FOOD GRADE PTFE MOLD GREASE

FOR GEARS, CAMS, CABLES, PINS, SLIDES, BEARINGS, CHAINS, ETC., ETC.
®
PPE OLD BULL Food Grade PTFE Mold Grease is a non-silicone, synthetic lubricating grease, specifically
developed for use around the mold where food approval is needed. It is both NSF H1 rated and Kosher approved. A
wide temperature range of -75°F to 500°F allows it to be used in a wide variety of applications. It is non-melting, anti-
®
corrosive, non-staining and can withstand high loads due to its superior load bearing ability. PPE OLD BULL does
not contain abrasive clay fillers.
A true H1 Rated • Food Grade NOTICE
Food Grade H1 Lubricants may be used in
Mold Grease • NSF H1 Rating applications where incidental food
contact may potentially occur.
• Kosher Approved
• Non-Staining H2 Lubricants can be used in food-
processing facilities, but only where
• Non-Melting there is absolutely no possibility of
contact with food.
• Non-Silicone
• Temp. Range: -75 to 500°F
• Color: Clear to Translucent
• Forms an Adherent, but Slippery Film

PRICES
PART NO. DESCRIPTION
1-4 5-9 10+
FMG02 2 oz. Plastic Jar $4.10 $3.95 $3.80
FMG13 13 oz. Cartridge $17.15 $16.45 $15.75
FMG15 15 oz. Plastic Jar $18.50 $17.75 $17.00
* FMG07 7 lb. pail (1 gal.) $107.00 $102.50 $98.00
* FMG33 33 lb. pail (5 gal.) $495.00 $475.00 ---
®
OLD BULL is a registered trademark of Plastic Process Equipment, Inc. *Pail has straight sides to accept pump device!
ISO-9002
WHITE LITHIUM GREASE QUALITY SYSTEM CERTIFIED
MANUFACTURED IN A
FACILITY.
FOR GEARS, CAMS, CABLES, PINS, SLIDES, BEARINGS, CHAINS, ETC., ETC.
PPE White Lithium Grease is a white lithium based lubricating grease especially formulated for lubrication of a
large variety of equipment over a wide range of operating conditions. It provides excellent lubrication in both high
and low temperature conditions, has a dropping point of 360°F and exhibits very good water washout characteristics.
It performs well under heavy loads and provides excellent lubrication protection under severe conditions, as it retains
its worked stability. PPE White Lithium Grease does not thin out significantly in service and has USDA H-2 rating.
• USDA H-2 Rating
• Temp. Range: -10 to 350°F
• Flash Point: 375°F BETTER
• Color: Off White PRICE
• Rust resistant BREAKS!
• Good water washout resistant
characteristics
• Also available in aerosol WL-125

PRICES
PART NO. DESCRIPTION
1-4 5-9 10+
WLG08 8 oz. Plastic Tube $6.30 $6.00 $5.70
WLG14 14 oz. Cartridge $9.95 $9.45 $8.95
WLG16 16 oz. Plastic Jar $10.85 $10.30 $9.75
* WLG07 7 lb. pail (1 gal.) $79.50 $75.50 $71.75
* WLG35 35 lb. pail (5 gal.) $307.50 $290.00 ---
*Pail has straight sides to accept pump device!
PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
676