Page 632 - Plastic Process Equipment, Inc

MOLD FLOW REGULATORS

THESE ARE THE
BETTER BUILT RELIABLE
FLOW REGULATORS YOU’VE
FEATURES
BEEN LOOKING FOR!
• 4 FLOW RATES AVAILABLE.
• 16 MODELS TO CHOOSE FROM.
• 180 P.S.I. RATED. THE BEST DESIGN FEATURES!
• 194º F RATED. THE BEST QUALITY!
• CONTROLS IN ONE LOCATION.
THE BEST PRICES!
• TEMP. GAUGE EACH ZONE.
THE BEST REASONS TO BUY!
• PUSH TO LOCK CONTROL KNOBS.
• PARTS REBUILD KIT INCLUDED.
• RUGGED CONSTRUCTION FOR IMPROVE YOUR PART
LONGER LIFE. QUALITY THROUGH
PRECISE FLUID
SPECIFICATIONS TEMPERATURE CONTROL
• Can be used with Ethylene & Propylene Glycol.
• 180 P.S.I. rated.
• 194°F/90°C temp. rating (polyamide nylon).
• 239°F/115°C polysulfone replacement tubes available.
OUTLET
• 16 models, 4 flow rates.
• Manifold blocks: Glass filled nylon with aluminum side plates.
• Mounting bracket available.
• Free rebuild kit included.
• Two 3/4 N.P.T. outlets on back side. One set is plugged.
MOLD
• Brass flow control valves.
• Brass flow shut-off valves. (both are push to lock type)
• Temp. gauge for each tube 0°F to 220°F (5° increments).
• Flow tubes come standard with: Special polyamide nylon material
(not polycarbonate) adjustable reference ring and contains brass float
cone. Reference marks are molded-in, not printed on. Removes
easily for cleaning. Polysulfone replacement tubes available. FLOAT
• 3/8” N.P.T. one piece brass outlets to mold.
• 3/8” N.P.T. one piece brass inlets, return from mold.
• Four flow rates:
1.00 G.P.M./3.78 liter
2.642 G.P.M. /10 liter
5.28 G.P.M. /20 liter
8.00 G.P.M./30 liter THERMOMETER is
directly in the fluid flow for
quick accurate readings. INLET
HERE’S HOW IT WORKS

1. Incoming fluid is piped to water inlet. BRASS REGULATOR
VALVES have a small seat
2. Fluid flows directly to mold.
diameter for accurate precise
3. After circulating through mold channels, flow adjustments.
fluid is directed up the flow tube through FROM
the fitting and the flow is regulated
by the control valve . MOLD
3/8 NPT female
4. Fluid is then returned to the tower, brass inserts
chiller or temperature controller. TO MOLD
PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
632