Page 476 - Plastic Process Equipment, Inc

STAINLESS DRAWER MAGNETS

STEEL HI-TEMP RARE EARTH TEMPERATURE
NEW HIGH
HI-HEAT OPTIONS: 1. SIDE FEED CHUTE W/SHUT-OFF GATE . . . . . . . . . . . . . . . . . . . . . . . . . . ADD $132.50
MODELS
SIZES AND PRICES
MODELS

2. DUMP CHUTE OUT BACK OF HOUSING . . . . . . . . . . . . . . . . . . . . . . . . . . ADD $62.00
3. LIQUID DISPENSING TUBE 1/2" NPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ADD $38.75
4. 3/8" TAPPED HOLES REQUIRES 3/8" THICK FLANGE . . . . . . . . . . . . . . ADD $61.75
5. 1/2" TAPPED HOLES REQUIRES 1/2" THICK FLANGE . . . . . . . . . . . . . ADD $105.75

HI-TEMPERATURE RARE EARTH
NEODYMIUM-IRON-BORON
1/4" STD.*
MAGNET 38 MGOe

Ball Knob
Star Knob
HI-TEMP Good to 400°F Insection
356°F * Window
180°C Good to
356°F

BOTTOM
FLANGE
Swing Bolt
Latch
Magnet Drawer Assembly
(Magnets, Window & Handle) Seal Gasket
1/4" STD.* Good to 400°F
*Optional flange thickness (3/8" & 1/2") will increase Dim. "L" accordingly.
Spare Parts Available
• HI-TEMPERATURE RARE EARTH • HI-TEMP, HI-TORQUE KNOBS • HEAVY DUTY 7 GA. 3/16" STAINLESS STEEL
NEODYMIUM-IRON BORON GOOD TO 400°F DRAWER HOUSING
MAGNET 38 MGOe • HI-TEMP POLYSULFONE INSPECTION • EASY TO CLEAN STAINLESS HOUSING
• SEAL GASKET GOOD TO 400°F WINDOW GOOD TO 356°F • PRICED RIGHT AS USUAL!

W SPECIFY O L * TOTAL
MODEL FLANGE OPENING SIZES PRICES
NUMBER MAGNET SIZE HEIGHT O.A. NUMBER DRILLED
SIZE W/SHUT-OFF OF TUBES
MIN. MAX.
WITHOUT SLIDING SHUT-OFF GATE
HTDM-44RE 4" x 4" See 1-3/8" 3" 9-1/2" 3 $781.50
HTDM-66RE 6" x 6" Stainless Steel 2" 3-1/2" 9-1/2" 5 $1,113.25
Drawer Magnet
HTDM-88RE 8" x 8" 3-1/2" 4-1/2" 9-1/2" 7 $1,519.00
Order Blank
HTDM-1010RE 10" x 10" Sheet 4-5/8" 6" 10-1/2" 9 $2,155.25
WITH SLIDING SHUT-OFF GATE
HTDM-44RESG 4" x 4" See 1-3/8" 1-7/8" 9-1/2" 3 $825.00
Stainless Steel
HTDM-66RESG 6" x 6" 2" 3-1/2" 9-1/2" 5 $1,214.25
Drawer Magnet
HTDM-88RESG 8" x 8" 3-5/8" 4-1/2" 9-1/2" 7 $1,658.25
Order Blank
HTDM-1010RESG 10" x 10" Sheet 4-5/8" 6" 10-1/2" 9 $2,320.50
Our rare earth magnets are a higher grade than the competition
and therefor have a greater pull force for holding tramp metal.

TO ORDER
When ordering determine the drawer magnet size by measuring your feed throat opening. For example, a 2" X 4" throat opening would require a
Model DM-88 Drawer Magnet. Specify housing model number and specify all dimensions listed on the order blank drawing supplied.

PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
476