Page 131 - Plastic Process Equipment, Inc

REGENERATIVE BLOWERS

( VACUUM PUMPS )

FOR DRYERS, PNEUMATIC CONVEYORS, VACUUM SYSTEMS, ETC.

Corrosion resistant
aluminum materials used Industrial duty, high efficient,
FEATURES for blower and motor 1.15 service factor AC motor
with TEFC (IP54) enclosure.
• 1/4 to 30 HP Viton seals suitable housings, conduit box Class H insulation rated to 355º F.
to 500°F protects
• Air Flow to 950 SCFM the motor windings
• Pressure to 11.5 psi RoHS Removable flanges
Compliant
• Vacuum to 12”Hg allow blower
change without
• Oil & Odor-free C disassembly of
pilings.
• Single or 3-Phase ISO-9001
• Quiet: 53 to 81 db(A) MANUFACTURED IN A
QUALITY SYSTEM CERTIFIED
FACILITY.
Built-in
Manufactured since 1986, the All-Star Regenerative Blowers silencers reduce
noise well-below
are the best choice for applications requiring a quiet, 100% oil-
OSHA Standard
free, odor-free and non-pulsating air or gas supply.
Regenerative Blowers are also referred to as side channel,
vortex or ring-type blowers. Shock absorbing
High temperature bearing mounting base
All-Star Regenerative Blowers (Vacuum Pumps) offer an lubricant melt point 385°F. High-efficient dynamically
balanced impeller
alternative to traditional high pressure blowers and pumps. The
regenerative blower is suitable for applications where positive
displacement (PD-type) blowers and pumps have been used.
Competitive Overhung All Star Straddle
It’s simple design permits the units to be used as a blower or Bearing Design Mounted Bearing Design
vacuum pump - without added parts.
Inboard bearing subject to Outboard bearing
• High Heat • Cooler Operating Bearing
STRADDLE MOUNTED IMPELLER DESIGN • High Overhung Load • Overhung Load Eliminated
Due To Radial Forces
High bearing temperatures that prove fatal in competitive
blowers are eliminated in the All-Star design because the
bearings are mounted on the outside of the blower housing.
Damaging overhung loads are eliminated in the All-Star design
because a bearing is located on each side of the impeller. This
design permits mounting the blower in any orientation, including
vertical shaft up or down. Impeller
Impeller Housing

PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
131