Page 1061 - Plastic Process Equipment, Inc

SCREW TIP WRENCHES

FOR THE REMOVAL OF FREE FLOW DESIGN CHECK RING VALVES
- FEATURES - 2 TYPES
• HEAVY STEEL CONSTRUCTION
• WRENCH CASE HARDENED
• STUDS MEDIUM HARD 34 Rc ILLUSTRATED:
SOLID WELDED HANDLE spreads out torque evenly to all pins to avoid chipping tip.
• ZINC PLATED MODEL FFW-34S
• SIZES FIT 3-4 OR 5 FLUTES
• 16” LENGTH OVERALL
• STUDS LOCK INDEPENDENTLY
• FITS COMPETING TIPS

Standard Type has
sliding studs with
locking screw.

S-Type has
threaded studs for ILLUSTRATED:
fast adjustment MODEL FFW-34
HINTS ON INSTALLING AND
REMOVING SCREW TIPS
TO INSTALL SCREW TIPS:
A. Be sure both female and male threads on screws and tips
are clean and well lubricated.
SIMPLE
B. Thread taps should be used to clean foreign material from
internal female threads. This is essential to insure tip installs QUICK
freely and bottoms out properly without using unnecessary EASY TO USE
force.
C. Insert screw tip and hand tighten only. Remember tip HIGHEST QUALITY
tightens during use as plasticizing screw rotates. GOOD PRICES
NEVER NEVER use an impact wrench and striking hammer to
install your screw tip. Most manufacturers tips are designed for MODEL FITS FITS NUMBER STUD PRICE
resistance to wear and torque conditions common to plastic DIAMETER OF FLUTES TYPE
molding. FFW-34 to 3" 3 or 4 Sliding $175.00
FFW-34S to 3" 3 or 4 Threaded $219.00
TO REMOVE SCREW TIPS: FFW-64 3" to 6" 4 Sliding $239.00
A. Inspect your plasticizing screw to determine if it has right or
left hand flights. Most screws have right hand flights. FFW-64S 3" to 6" 3 or 4 Threaded $300.00
PDFW-35 to 3" 5 Sliding $177.00
B. Unscrew screw tip the opposite hand of the flights. Right PDFW-65 3" to 6" 5 Sliding $195.00
hand flights have a left hand screw tip thread which is most
common. SPARE STUDS:
# 122 1/2” Dia. x 2” Long for 3” Wrenches ............ $8.00 ea.
C. If screw tip will not loosen, try heating the root diameter of # 343 3/4” Dia. x 3” Long for 6” Wrenches ............ $7.90 ea.
the screw over the screw tip area only, to 700-900°F. Do not # 122S 5/8 threaded stud for 3” Wrenchs ............. $6.75 ea.
heat screw above this temperature as you may damage the # 343S 3/4 threaded stud for 6” Wrenchs ............. $8.10 ea.
screw or affect the hardness quality.
PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
1061