Page 983 - Plastic Process Equipment, Inc

FREE FLOW DESIGN / H-13 STEEL
H-13 FREE FLOW CHECK RING VALVES

O.E.M. DIMENSIONS PLUS FREE FLOW DESIGN
MADE FROM H-13 AND D-2 TOOL STEEL

FOR USE ON HEAT SENSITIVE AND MODERATELY FILLED MATERIALS

B B
A NOSE ANGLE
(MATCHES
OEM SPECS)

MADE FROM H-13
TOOL STEEL
SEAT RING HEAT TREATED. RETAINER ISO-9002
D-2 HEAT TREATED
MANUFACTURED IN A
QUALITY SYSTEM CERTIFIED
FACILITY.
FREE FLOW FEATURES STYLE
• MADE FROM WEAR RESISTANT H-13/D-2 TOOL STEELS.
ALTERNATIVE &
• FREE FLOW DESIGN RECOMMENDED BY YOUR PLASTIC INTERCHANGABLE
MATERIAL SUPPLIERS. 2 CASTLE STYLE
• (A) FREE FLOW FLUTES, REDUCES WEAR, SHEAR AND RING IS AVAILABLE
AVOIDS OVERHEATING MATERIAL. FOR MOST FREE
FLOW VALVES.
• (B) FLAT FACES BETWEEN RING AND RETAINER REDUCES
WEAR.
• PARTS NOT INTERCHANGEABLE WITH O.E.M. PARTS
BECAUSE OF FLAT FACES BETWEEN RING AND RETAINER. CASTLE STYLE FEATURES
• H-13 STEEL IS USED BECAUSE IT WITHSTANDS WEAR AND • CASTLE STYLE IS IDEAL FOR USE WITH POLYETHYLENE
TORQUE STRESS BETTER THAN ALL OTHER TOOL STEELS AND POLYPROPYLENE MATERIALS PLUS OTHER GENERAL
IN ITS CLASS. PURPOSE RESINS.
• SEAT IS D-2 STEEL HEAT TREATED. A D-2 SEAT IS SUPPLIED • OUR FREE FLOW DESIGN PROVIDES GENEROUS FLOW
DUE TO IT'S HIGH IMPACT, CORROSION AND WEAR PATHS ELIMINATING SHEAR ON HEAT SENSITIVE AND
RESISTANCE. GLASS FILLED RESINS.
• PROPERLY HEAT TREATED FOR LONGER LIFE AND • CASTLE STYLE IS AN IDEAL REPLACEMENT FOR BALL
MAXIMUM WEAR RESISTANCE CHECKS TIPS PLUS YOU WILL REALIZE IMPROVED FLOW
VOLUMES.
• O.E.M. SIZE SPECIFICATIONS DUPLICATED TO ENSURE
PROPER FIT IN YOUR BARREL. • IDEAL FOR USE ON HIGH SPEED SCREWS, HIGHER BACK
PRESSURES, PLUS YOU WILL REALIZE FASTER INJECTION
• DEPENDABLE THREE PIECE DESIGN.
CYCLES & RECOVERY RATES.
• FREE FLOW NON-RESTRICTIVE DESIGN.
• A FREE FLOW DESIGN THAT INCORPORATES THE LOCKING
• FREE FLOW FLUTES ALLOW FASTER SCREW RECOVERY. RING (CASTLE STYLE) DESIGN FOR FASTER SCREW
RECOVERY.
• PRECISION GROUND SEATS AND RINGS.
• CASTLE STYLE (LOCKING RING) ELIMINATES PREMATURE
• OPTIONAL TO ORDER: CPM S90V STAINLESS STEEL
CPM S90V Stainless Steel offers outstanding corrosion resistance WEAR BETWEEN THE RING AND RETAINER FLUTES AS
combined with high wear resistance as it contains 14% Chromium THE RING SPINS WITH THE RETAINER.
and 9% Vanadium. Typical applications would include PVC and • ALL THE ADVANTAGES OF A FREE FLOW DESIGN SCREW
other resins with chemical additives such as flame retardants. TIP WITH THE POSITIVE SHUT-OFF ACTION OF A BALL
CHECK.
• BOTH CASTLE AND STANDARD RINGS FIT THE SAME
Worn 60mm Husky Tip RETAINER AND SEAT ON OUR STOCKED FREE FLOW CHECK
shown RING VALVES.

Photo shows where the non-locking
(Standard Style) ring has worn away the
mating faces on the retainer. The locking
Castle Style will eliminate this premature
wear as the ring spins with the retainer. It
will not add to the wear of your barrel as the
ring floats unlike a ball check type.

PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
983