Page 916 - Plastic Process Equipment, Inc

CERAMIC HEATER BANDS

QUALITY AMERICAN MADE CONSTRUCTION

DETERMINING

HEATER WATTAGE
2
Suggested watt density is 40 to 45 w/in for
ceramic heater bands. To determine heater
wattage multiply 3.14 x I.D. x width.
SPECIFICATIONS
• Expandable, will open fully to fit around barrel O.D.
E
WR R • 5/8” high lock-up flanges standard or barrel nut clamp
optional at no charge.
W W
I R • 1/4-20 post terminals located 180° from gap.
• Total wall thickness 5/8”.
E I W
IR E • All stainless steel sheath.
(VOLTS) (AMPS)
E R W EI TO ORDER SPECIFY
I (OHMS) (WATTS)
1. Ceramic heater band, standard construction.
W 2 2. Inside diameter x width.
I 2 I R 3. Voltage and wattage.
E 2 E 2 4. Lock-up option, flange or barrel nut clamp.
W R
5. Post terminals or other type.
6. Terminal box if required.
VARIATIONS OF OHM’S LAW 7. Thermocouple hole and location.

Flange Type Lock-up and BX Armor Over Flexible Leads in
Standard Terminals Latch and Trunnion Lock-up Low Profile Box

T.C. Hole in Gap with Cut Away of Insulation MAX ®
2 Terminal Box 3 Terminal Box Clamping Tabs Offset Ceramic Heater Band

PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
916