Page 904 - Plastic Process Equipment, Inc

HEATER BAND WIRING

1 PIECE HEATER BANDS

1 PIECE BAND RATED 1 PIECE BAND RATED
120 VOLT 1,000 WATTS 240 VOLT 1,000 WATTS

120 VOLTS 240 VOLTS

PARALLEL WIRING: SERIES WIRING:
HEATER BANDS ARE NORMALLY ILLUSTRATION SHOWS 240 VOLT BANDS WIRED
WIRED IN PARALLEL BY ZONES TO ACCEPT 480 VOLTS. BANDS MUST BE OF
240 VOLT HEATER BANDS EQUAL WATTAGE AND WIRED BY PAIRS IN SERIES.

240V 240V 240V 240V
240V 240V 240V 1000W 1000W 1000W 1000W
1000W 1000W 1000W

240 VOLTS

CAUTION: follow equipment
manufacturers instructions 480 VOLTS
when working on any electrical
items, (wiring, controls, heater
bands, cartridge heaters, etc.,.)
HOW TO WIRE DUAL VOLTAGE BANDS

SINGLE COLOR
120V 120/240 Volt 240/480 Volt
120
VOLT 2 SAME COLOR
Single Color Single Color
REDS OR WHITES
120 VOLTS 240 VOLTS
1) Connect single color wire to common.
2) Join 2 same color wires to hot. 2 Same Color 2 Same Color

SINGLE COLOR Don't Use Don't Use
TAPE-UP DON'T USE Single Color Single Color
240 240V
VOLT 2 SAME COLOR

REDS OR WHITES 2 Same Color 2 Same Color
1) Tape-up single color wire and do not use.
240 VOLTS 480 VOLTS
2) Connect one of the 2 same color wires to one
side of the line and the other of the 2 same
color wires to the other side of the line. © Copyright 2022 Plastic Process Equipment, Inc.
Note: PPE customers may reproduce this form
only in it's entirety.
PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
904