Page 650 - Plastic Process Equipment, Inc

CARNAUBA WAX CARNAUBA WAX

PAINTABLE MOLD RELEASE
BLOCK OR POWDER
MOLD RELEASE #CW-165 AN EXCELLENT MOLD SURFACE
RELEASE AGENT

A FULL
MOLD WAXING PROCEDURE
16 OUNCE SOLVENTS 1) Make sure the mold is clean and free of plastic.
NO CHEAP
FILL
2) Bring mold up to within 25°F of molding temperature. All mold
surfaces should be within 5°F of each other. You can use a
surface pyrometer to check this temperature.
CARNAUBA 3) Wax the mold with carnauba wax. Wax all surfaces of the
mold, including ejection pins.
WAX
MEETS FDA
4) Bring the mold up to the correct temperature for molding.
REGULATIONS SILICONE 5) Run at least four shots, waxing the mold after each shot or until
NON-
the parts release easily from the mold.
BLOCK SYNTHETIC CARNAUBA
3-1/4"
WIDE
- SPECIFICATIONS- 1-3/4"
Melt Point: 181.5°F/83°C TALL
Flash Point: 1058°F/570°C
Color: Yellow
Saponification Value: 78-88
(the process to convert 7" LONG
IDEAL FOR APPLICATIONS THAT REQUIRE glycerylesters to soap)
A DRY WAX POWDER SPRAY.
19 oz. Wax Block
SPECIFICATIONS: Part No. 90017 . . . . . . . . . . . . . . . . . $37.10 ea.
• 16 oz. volume, 16 oz. fill weight
• Higher concentration
• Handy can size
• Paintable REFINED BLEACHED CARNAUBA #3 POWDER
• Plastic fan spray valve
• Lubricates ejector pins - SPECIFICATIONS-
• Carnauba Wax meets the requirements for use in food POWDER CARNAUBA
industry applications under 21 CFR 175.320 (b) (3) iii. Melt Point: 181.5°F/83°C
Flash Point: 590°F/310°C
Color: Yellow
FORMULA: Meets FDA regulations under
PPE Carnauba Wax Spray CW-165 is a special blend of 21 CFR 175.320 (b) (3) iii and
pure Carnauba Wax suspended in solvents suitable for is CTFA Listed.
aerosol packaging. It is an ideal release agent for injection Saponification Value: 78-88
molding, casting or encapsulating thermosets, epoxies and (the process to convert
phenolics. It is also widely used in the electronics industry glycerylesters to soap)
in the manufacturing of semiconductors, capacitors, Dip paintbrush into the powdered carnauba wax and paint all
resistors, transformers, connectors, etc. Our aerosol mold surfaces or dust it on with a clean rag or bellows.
system dispenses a fine mist on your mold surfaces which
allows an excellent release coating. Carnauba is an 5 lb. Box
excellent alternative to silicones or fluoropolymer type Part No. 90016 . . . . . . . . . . . . . . . . . $57.20 ea.
releases.
ISO-9001 55 lb. Fiber Drum
MANUFACTURED IN A Part No. 90018CB . . . . . . . . . . . . . $629.00 ea.
QUALITY SYSTEM CERTIFIED
SPRAY NO. CW-165 FACILITY.
PRICES IDEAL FOR
QUANTITY
PER DOZ. PER CAN THERMOSET
1-11 CANS — $7.20 MOLDING
1-3 DOZ. $83.40 $6.95
4-11 DOZ. $80.40 $6.70 CLEAN - SAFE - DRY
REQUIRES NO SOLVENTS
12+ DOZ. $77.40 $6.45
PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
650