Page 400 - Plastic Process Equipment, Inc

MOLD ALIGNMENT PAPER

®
Mold-Align is a unique, low cost tool that reveals
pressure distribution between mold platens.

The color tells it all.

• Contact pressure is revealed by color changes. Of the hundreds of variables involved in injection
High pressure = Darker. molding, clamping mechanisms and platens often get
Low pressure = Lighter. less attention than they deserve. Good clamp
• Economical alignment check. performance is critical to minimize cycle times, optimize
part quality, and maintain process consistency.
• Helps eliminate flash.
Alignment and uniformity of the mold halves, platens,
• Helps extend mold life. and clamping system is therefore critical. Whether an
• Instructions included. alignment problem stems from the mold parting line,
the platens, or the clamping mechanism and tiebars,
• 3 Easy Steps to use.
the results can be unnecessary machine wear, mold
• Available in 2 Roll Sizes.
damage, broken tiebars, mold flash or scrap parts.

Select Mold-Align roll size
®
cut to size needed

• Thickness 4 mils (0.1016 mm) • Pressure Range 1,000 - 6,000 PSI (70 - 422 kg/cm2)
• Temperature Limit 200°F (93°C) • Usable Humidity Range 10-90% RH

PRICE EACH
PACKAGE SIZES QUANTITY PART NO.
ROLL
10.5" x 50 ft. (26.7 cm x 15.2 m) 1 Roll MAPR1050 $225.00
Roll
27.6" x 50 ft. (70.1 cm x 15.2 m) 1 Roll MAPR3050 $510.00

PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
400