Page 193 - Plastic Process Equipment, Inc

8” SUPER GATE CUTTERS

FLAT BACK - SLIM PROFILE - EXTRA SLIM BLADES

CAUTION: MODEL SWC77
Extra Slim Blades Double Grind 1/8” per side.
This Extra Thin Blade design limits your cuts Length O. A.: 8”
to 1/8” to 3/16” dia. only. Blade Length: 7/8”
Blade Angle: 15°
Adjustable Blade Stop,
must be set to avoid Opening at Tip: 3/4”
blade damage. Opening at Base: 3/16”
Weight: 8 oz.
Orange Foam Grips
Anti-Static
Stainless Coil Spring
†Stainless Coil
Slim Spring w/ Stop Pin Adjustabe Blade Stop
Profile
Flat Back Model SWC77 Super Cutters
$30.00 ea.
1-11 pair
12-23 pair $28.00 ea.
24+ pair $26.25 ea.
GOOD SLICING ACTION #SWS789 Stainless Springs .... $2.25 doz.
ON SMALL DIA. PARTS!
(not polycarbonate!) NOTE: Due to the very special extra thin
blade design, no replacement guarantee
For cutting plastics only. Always wear safety glasses.
can be offered for this cutter.
8” SUPER GATE CUTTERS

FLAT BACK - SLIM PROFILE

PPE SUPER SHARP GATE CUTTERS MODEL SWC78
Beyond Premium Quality for Longer Life.
Best Steel - Best Hardness - Best Finish. Length O. A.: 8”
High Chromium Swedish/American Type Steel. Blade Length: 15/16”
Lasts up to 13 Times Longer than Premium Cutters. Blade Angle: 15°
Ultra Sharp - Slim Profile - Flat Back. *Adjustable Opening at Tip: 3/4”
Adjustabe Blade Stop. Opening at Base: 3/16”
Blade Stop
Weight: 8 oz.
Orange Foam Grips
Anti-Static
Stainless Coil Spring
†Stainless Coil Adjustabe Blade Stop
Slim Spring w/ Stop Pin
Profile
Model SWC78 Super Cutters
Flat Back 1-11 pair $31.00 ea.

† Supplied with replaceable 12-23 pair $29.00 ea.
Stainless Steel Coil Spring
for field changing. Made 24+ pair $27.00 ea.
from Stainless Steel Piano
Wire. No factory replace- #SWS789 Stainless Springs .... $2.25 doz.
able welded leaf springs!
PPE Slim Profile Design Gate Cutters have a special ground down back side which serves two functions. It is
* Be sure to set the Adjustable Blade Stop ideal for reaching into confined places for cutting and it offers a better slicing action when cutting through plastic
to help extend Ultra Sharp Blade life. to avoid premature fracturing. The extra grinding is a more expensive hand operation well worth the added cost.
PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
193