Page 5 - Plastic Process Equipment, Inc

SPRUE PICKING SWING-ARM ROBOTS

PHOENIX Series - Single Stage & Telescopic Arm

High Speed, High Efficiency, Low Noise, Long Use Life, Super Economy

Performance, speed, stability, and durability... all key attributes of • Eight(8) sets of pre- program operational
the Phoenix Series Swing-Arm Robots makes them ideally sequences and 12 sets of TEACH
suitable for sprue separation and parts removal on injection molding programs can meet all requirements for
machines from 15 tons to 300 tons. injection molding cycles.
• Retains up to 50 mold set-ups in memory –
The Phoenix Series Swing-Arm Robots have four easy to use.
pneumatic-driven axes of motion. The horizontal axis pulls • Malfunctions will automatically be detected,
the runner/parts away from the mold. The vertical axis lifts displayed and recorded in memory.
the runner/parts out of the mold area. The swing axis pivots • Screen can display all the input/ output
the arm over the safety gate to outside of the injection connection points, convenient for fast
molding machine where the runner/parts are released after maintenance.
the arm re-extends. In addition, the standard wrist axis on • LED displays status of operation, such as
the arm rotates the gripper to enable orientation of runner/ Safety Door, MOP, Open/ Close Mold,
parts. Products Detecting.
• Interface with auxiliary equipment such as
The Phoenix Series offers the fastest take-out times available conveyor or Silicon Spray Device.
for sprue separation and parts removal. The self-lubricating • Timer and Counter can be set under AUTO
pneumatic drive system ensures low maintenance, MODE .
exceptional stability and reliability. This series of robots are • Euromap12/SPI interface standard on all
constructed on modular principles to ensure high precision models. Euromap67/SPI2 optional.
and lightness. The main arm rides vertically on a linear slide- • All models are CE Certified.
rail and slides horizontally on two roller guide-ways; no
maintenance is required and smooth running and the elimination
of play/slack is ensured. Travel cushions on the vertical axis
minimize vibration and ensure smooth deceleration; hydraulic
shock absorbers are fitted on the crosswise axis for efficient
damping. STABLE
2 ROLLER
GUIDE-WAYS
For maximum flexibility the arm can be easily adjusted to
release runner/parts at the operator or the rear side of
the machine. The swing angle can be freely adjusted
between 60 to 90 degrees through a positive, but
easily adjusted location fitting on the cylinder-driven
oscillating arm. The manual clamp system on the
Phoenix Series of robots allows them to swing
clear of the mold area in seconds without the
use of any tools. The built-in ratchet mechanism,
which controls motion of the robot arm out of the
mold area, enables easy mold changes or
maintenance.
Fast, responsive and reliable pneumatic control units are integrated 90° WRIST
at the side of the robot. Moving speeds on all axes are fully STANDARD
adjustable. The main arm safety lock prevents the arm from
descending in the event of loss of air pressure. The sprue is
monitored by a sensor contained inside the gripper assembly. The WIDE GRIPPER
vacuum generator and freely adaptable end-of-arm suction tooling STANDARD
are supplied as standard accessories.

The Phoenix Series utilizes a microprocessor control system which
includes an easy to operate hand-held pendant controller. The
controller features a large LCD display and adjustable digital timers
and counters providing simple programming for repeatable
operations.

The Phoenix Series Swing-Arm Robots utilize the industry SWIVEL
BASE
standard of Euromap12/SPI robot interface, thus allowing the unit RELEASE
to be easily moved from one machine to another.
LEVER
4 POINT EOAT KIT
INCLUDED

PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056 E LAS VEGAS, NEVADA 89113 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
5