Page 17 - Plastic Process Equipment, Inc

EOAT BASIC MOUNTING PLATES

FOR USE WITH ALUMINUM PROFILES

Example: Basic Mounting Plates will work with all aluminum profiles like X & J
BPF150 shown fitted with Profiles. The pre-drilled and counter-bored holes on each side, let
CJ-2038 Cross Clamps. you easily install on your robot tooling plate. These EOAT Basic
Mounting Plates are for gripper-side use only.

150mm x 150mm
Basic Mounting Plate

BPF150 can be used as a manual EOAT mounting plate to be adapted
with all aluminum profiles. Holes can be drilled and tapped as
5 necessary.
10
150
25
60 20
40 20 25
35 Weight:
585g
150
35 40
Countersunk holes 60
for use with M5 cap
screws (x8)
Part No. BPF150
$ 00
Countersunk slots for use 31.
with M5 cap screws (x4)

225mm x 225mm
Basic Mounting Plate
10 15
BPF225 can be used as a manual EOAT mounting plate to be adapted
225
40 with all aluminum profiles. Holes can be drilled and tapped as
necessary.
20
20 40
25
25

225
Weight:
1973g

Countersunk holes for use with M5 cap screws (x16)
Countersunk holes for use with M6 cap screws (x12) Part No. BPF225
$ 77. 00

PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com
e-mail: sales@ppe.com
E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET
A MACEDONIA, OHIO 44056-2300 E LAS VEGAS, NEVADA 89113-1186 Toll Free: USA, Canada & Mexico
S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706
T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305
17