Page 221 - Plastic Process Equipment, Inc
P. 221

THE SMALLER HEATED GATE CUTTER


                                                FOR HEAT SEALED CUTS


             FEATURES & SPECIFICATIONS                    FOR OPERATOR SAFETY A                      BLADE OPENING
                                                          SEPARATE GROUND LEAD IS                    1" AT TIP
        • 100 to 350°F Cutting Edge Temperature           ATTACHED TO THE HEATER                     1/2" AT BASE OF
        • Lower Initial Cost                              SHEATH.                                    CUTTING EDGE
        • Lower Replacement Cutter Cost
        • Precise Pivot for Better Blade Alignment        CAUTION: ALWAYS WEAR                       BLADE LENGTH
                                                                                                     15/16"
        • Cutter Can be Resharpened                       HEAT RESISTANT GLOVES
                                                          WHEN USING A HOT
        • Heat Block is Replaceable                       CUTTER.
        • Smaller Cutting Head than Competing Models
        • Uses Higher Wattage 1/4" Dia. Heaters
        • Swaged-in Stainless braid lead
        • Head Width 3/4" x 1/4" High                         HEAVY DUTY                REPLACEABLE HEATER BLOCK
        • Flat Back for Flush Cuts                            COIL SPRING               IF YOU WEAR OUT THE CUTTER
        • Hot Blades Cut Easier                               #PLC513A                  YOU ONLY BUY A NEW LOW
        • Heat Seals Cuts                                                               COST GATE CUTTER AND
                                                                                        CHANGE THE PARTS
        • Eliminates Cut Cracks
        • Foam Insulated grips
          (We suggest you wear a glove
          for protection when you use
          this hot cutter)

        MODEL HGC-K45                        #P-304-CCT                                         FLAT BACK BLADES
                                             Plug Only
                                                                       FOAM                         30° ANGLE
        HEATED GATE CUTTER KIT                                      INSULATED                    NON-REMOVABLE
        $ 230.        00                                          HANDLE COVER                           #S-304-AB

                                                                          ILLUSTRATE:                   Replacement
        REPLACEMENT GATE CUTTER                                          MODEL HGC-K45                    Socket
        MODEL HGC-45                                                  HEATED GATE CUTTER
                                           STAINLESS STEEL            KIT WHICH INCLUDES,
        ONLY                                BRAIDED LEADS               CUTTER, HEATER
                                             RESIST WEAR                AND SOLID STATE
        $ 31.   00                                                       CONTROL BOX.
        The Model HGC-K45 is a lower cost answer to trimming problems that require a heated gate  Fuse Types used:
        cutter. However, this cutter is not as effective or efficient as our larger Model HGC-K10 due  Old Style (silver box): AGC-1
        to the location of the heater blocks which are fastened directly on the cutting blades.  This  New Style (black box): GMA-1
        permits better heat transfer, higher temperatures and thus more effective cutting.           HGC-06
                                                                                                SOLID STATE TEMP.
        CAUTION: USE HIGH TEMPERATURE GLOVES WHEN USING A PPE HEATED GATE CUTTER!               CONTROL 120/60/1
          PART NO.                                      DESCRIPTION                                        PRICE
          HGC-K45      HEATED GATE CUTTER KIT W/CUTTER, HEATER ASSEMBLY, CONTROL BOX AND PAD               $230.00
           HGC-44      HEATED GATE CUTTER ASSEMBLY WITHOUT CONTROL BOX                                      $83.00
           HGC-45      HEATED GATE CUTTER ONLY DRILLED FOR HEATER BLOCK                                     $31.00
                       CARTRIDGE HEATER ASSEMBLY WITH GROUNDED SHEATH AND PLUG 120/60/1
           HGC-43                                                                                           $43.20
                       HEATER IS 1/4" DIA. x 1-1/16" LONG x 50 WATTS, 120 VOLT, 72" STAINLESS STEEL LEADS
           HGC-06      SOLID STATE TEMPERATURE CONTROL 1 AMP 120/60/1 W/6FT. GROUNDED CORD                 $175.00
           HGC-15      3/4" I.D. HEAT SHRINK TUBING 4" LONG (1 req'd)                                             $.72 ea
           HGC-09      FOAM INSULATED HANDLE GRIP VINYL PLASTISOL (1 req'd)                                     $1.50 ea
           HGC-42     ALUMINUM HEATER BLOCK W/ALL SCREWS AND HEX KEY                                          $10.40 ea
           HGC-13      INSULATION PAD 4" x 4" x 1/4" TO REST HEATED CUTTER ON BETWEEN CUTS.                   $2.95
          P-304-CCT   4 PIN PLUG WITH STRAIN RELIEF                                                           $4.45
          S-304-AB    4 PIN SOCKET WITH ANGLE BRACKET                                                         $2.95
        NOTE: This is a non-returnable product unless it's defective. It will be replaced.
                  PLASTIC PROCESS EQUIPMENT, INC.                                            www.ppe.com
                                                                                            e-mail: sales@ppe.com
                   E 8303 CORPORATE PARK DRIVE         W  6385 MONTESSOURI STREET
                  A MACEDONIA, OHIO 44056-2300         E  LAS VEGAS, NEVADA 89113-1186  Toll Free: USA, Canada & Mexico
                   S 216-367-7000 • FAX: 216-367-7022  S  702-433-6385 • FAX: 702-433-6388  800-362-0706
                   T TOLL FREE: 800-321-0562            T  TOLL FREE: 800-258-8877         Order Fax: 800-223-8305
                                                                                                                 221
   216   217   218   219   220   221   222   223   224   225   226